Page 1 of 2
The Projects List
Posted: Thu Apr 10, 2003 10:22 am
by Namuna
Alright here's all the shit I need/want to do...
- IR PCB Board swap
- Current & RPM Motor Tests
- Multi Cell mods
- Wheel mods
- Battery Capacity Tests
- Build a Track (Gotta find a home first)
- Custom bodies
- Alloy wheels
And a bunch of other stuff I can't think of at the moment.
Posted: Thu Apr 10, 2003 10:25 am
by hogjowlz
ir board? from a digiq? are those things worth getting?
Posted: Thu Apr 10, 2003 10:51 am
by CaboWabo
My list off the top of my head:
- Perma-dual cell
- Paint jobs
- Wheel mod
- Frankenbit
edit:
- 3rd controller battery
I know there's more I'm forgetting.
Posted: Thu Apr 10, 2003 3:57 pm
by Namuna
Hog,
You can buy the board (no need to hack a DigiQ)
http://www.tapspring.com/BCQ.htm
Posted: Thu Apr 10, 2003 4:36 pm
by noxorc
swearword.... if the OEM didn't do it....someone did.
-nox
Posted: Thu Apr 10, 2003 4:48 pm
by hogjowlz
ya but im gona need the digiq controller to run it right?
Re: The Projects List
Posted: Thu Apr 10, 2003 4:53 pm
by noxorc
Namuna wrote:Build a Track (Gotta find a home first)
find a home? find a home for all the stuff you buy... ?? or buy a house?
-nox
Posted: Thu Apr 10, 2003 5:06 pm
by hogjowlz
can i pick up one of those iracers at we be toys and do this mod? just swap pcb into bit and have propo?
Posted: Thu Apr 10, 2003 6:11 pm
by payaso
hogjowlz wrote:can i pick up one of those iracers at we be toys and do this mod? just swap pcb into bit and have propo?
Nope... That's the thing. You need the propo controller from the Digi Q, but you can buy that seperate, and then buy the chip from Tapspring..
silla
Posted: Thu Apr 10, 2003 6:54 pm
by noxorc
buy two Hog and give me one... I'll hold it for you, til you break the one you got.
-n
Posted: Fri Apr 11, 2003 8:11 am
by Namuna
hogjowlz wrote:can i pick up one of those iracers at we be toys and do this mod? just swap pcb into bit and have propo?
You could, but I'd suspect you'd be in need of help from one of your EE friends...The Tapspring site gives you the step by step instructions on what to solder and where, you'd have to figure all that shit out with the iRacer.
Posted: Fri Apr 11, 2003 9:33 am
by hogjowlz
well you have + g l r f r
the steering wires with white crap on em go to +
shouldnt be too hard. my ee budy has all the tools tho. fuker went fishin all weekend.
btw i held out on the iracer cuz i didnt read your reply and got a monster truck for 12 bucks.
Posted: Fri Apr 11, 2003 9:45 am
by kwikbb
the ir pcb swap is a swell mod isn't it?! that's pretty cool that tapspring has the pcb seperate, i was unaware of that. last time i went to the site they just had the instructions... been a while i guess.
Posted: Sat Apr 12, 2003 12:50 am
by ph2t
My mods are all electronic orientated. I gotta use my EE degree for sumthin' and it ain't in my current job roles (I.T).
Proportional Controller Emulator
Super Range Modification
Knight Rider lights (bought some SMD LED's last week)
Multiple frequencies mod
ph2t.
Posted: Sat Apr 12, 2003 12:58 am
by hogjowlz
ph2t wrote:
Super Range Modification
Multiple frequencies mod
explain these mang