SSMT Project
-
- bitThug
- Posts: 56
- Joined: Sun Apr 02, 2006 7:06 pm
- Location: Iowa
SSMT Project
Well i'm guessing i can put this here because it's 1:24 scale
So here's how this this is going down. Brass chassis, ssmt electronics, ssmt wheels and nuckles, ssmt electronics, ssmt shocks, and some dogbones and cups.
I started off with a prototype. Bamboo skewers and hot glue! I used ssmt motor and gears and the diff for my gear box. For the axle, it's the transfer axle that goes from the rear of the truck to the front of the truck with the two cups that you would find going through the center of your nonmodifyed ssmt. I used a ssmt tire and nuckle from the front of the truck for one of the rear tires. I also used the dogbone that was on the truck before and made it longer. I assembled it and it worked great. Maybe i won't finish the prototype, i'll just start making the brass one now! Now if only i can figure out how to post pics.
So here's how this this is going down. Brass chassis, ssmt electronics, ssmt wheels and nuckles, ssmt electronics, ssmt shocks, and some dogbones and cups.
I started off with a prototype. Bamboo skewers and hot glue! I used ssmt motor and gears and the diff for my gear box. For the axle, it's the transfer axle that goes from the rear of the truck to the front of the truck with the two cups that you would find going through the center of your nonmodifyed ssmt. I used a ssmt tire and nuckle from the front of the truck for one of the rear tires. I also used the dogbone that was on the truck before and made it longer. I assembled it and it worked great. Maybe i won't finish the prototype, i'll just start making the brass one now! Now if only i can figure out how to post pics.
There is no greater bore than perfection.
-
- bitThug
- Posts: 56
- Joined: Sun Apr 02, 2006 7:06 pm
- Location: Iowa
-
- bitThug
- Posts: 56
- Joined: Sun Apr 02, 2006 7:06 pm
- Location: Iowa
- steelwoolghandi
- bitPimp
- Posts: 1696
- Joined: Fri Jun 11, 2004 11:53 am
- Location: RIGHT BEHIND YOU!!
- Contact:
-
- bitThug
- Posts: 56
- Joined: Sun Apr 02, 2006 7:06 pm
- Location: Iowa
-
- bitDisciple
- Posts: 1798
- Joined: Thu Jul 31, 2003 7:15 pm
- Location: Barbados
Ditto!!steelwoolghandi wrote:That is really startting to look cool I can't belive I missed this post.
I guess it's cuz of the topic name. I only happened to glimpse at the author. This project is coming along great. I thought you had deserted bitpimps after the flack you got about your track. Are you sure you're the same guy?
What you're doing here is what bitpimpin' is about. Keep it up man
Maxx
-
- bitThug
- Posts: 56
- Joined: Sun Apr 02, 2006 7:06 pm
- Location: Iowa
I ain't going no wareMaxximum Attack wrote:Ditto!!steelwoolghandi wrote:That is really startting to look cool I can't belive I missed this post.
I guess it's cuz of the topic name. I only happened to glimpse at the author. This project is coming along great. I thought you had deserted bitpimps after the flack you got about your track. Are you sure you're the same guy?
What you're doing here is what bitpimpin' is about. Keep it up man
Maxx
Thanks for the comments. I'm hoping to get the rear finished by the sunday.
There is no greater bore than perfection.
-
- bitThug
- Posts: 56
- Joined: Sun Apr 02, 2006 7:06 pm
- Location: Iowa
-
- bitThug
- Posts: 56
- Joined: Sun Apr 02, 2006 7:06 pm
- Location: Iowa
-
- bitDisciple
- Posts: 1798
- Joined: Thu Jul 31, 2003 7:15 pm
- Location: Barbados
-
- bitThug
- Posts: 56
- Joined: Sun Apr 02, 2006 7:06 pm
- Location: Iowa
-
- bitThug
- Posts: 56
- Joined: Sun Apr 02, 2006 7:06 pm
- Location: Iowa
-
- bitDisciple
- Posts: 1798
- Joined: Thu Jul 31, 2003 7:15 pm
- Location: Barbados