New shen qi wei's ? Offroad style.
-
- bitNinja
- Posts: 883
- Joined: Sat Oct 30, 2004 5:42 pm
- Location: New Zealand
I'd say so , but the gearing is waaaaay to high to think about crawling.
Best thing to do if you want to make this offroad worthy (im not talking crawler , just jumps/bumps offroad) would be.
Lipo - kokam 145mah
4.2NX motor
Springs up front
Custom H plate rear ( would take some work )
Then you'd be set for some fun
Best thing to do if you want to make this offroad worthy (im not talking crawler , just jumps/bumps offroad) would be.
Lipo - kokam 145mah
4.2NX motor
Springs up front
Custom H plate rear ( would take some work )
Then you'd be set for some fun

We don't need no god damn roads!
-
- bitNinja
- Posts: 883
- Joined: Sat Oct 30, 2004 5:42 pm
- Location: New Zealand
Internal shots...
Ok so I started tinkering with one of these again today, and ended up breaking a knuckle, the plastic was very brittle.

So I decided to open it up more, and take some pictures of it's guts


Then I noticed something really interesting, something i'd never seen before, I opened up the steering box, and
A single coil and double magnet steering setup....

i'm a little more fond of this body, Allthough it's still kinda wierd.

These arent compatable with regular bit stuff, but do make great carpet racers, they are extremely high geared, and when I ran a 3.0 hardwired in it, It took the length of my lounge (pretty large) to get up to speed.
and that was fast.
Ok so I started tinkering with one of these again today, and ended up breaking a knuckle, the plastic was very brittle.


So I decided to open it up more, and take some pictures of it's guts



Then I noticed something really interesting, something i'd never seen before, I opened up the steering box, and

A single coil and double magnet steering setup....


i'm a little more fond of this body, Allthough it's still kinda wierd.


These arent compatable with regular bit stuff, but do make great carpet racers, they are extremely high geared, and when I ran a 3.0 hardwired in it, It took the length of my lounge (pretty large) to get up to speed.

We don't need no god damn roads!
- kvik369
- bitPlaya'
- Posts: 179
- Joined: Wed Dec 03, 2003 6:59 am
- Location: pa
These may be the same - they were called Hurricane
http://bitpimps.lixlink.com/pages/phpFo ... highlight=
http://bitpimps.lixlink.com/pages/phpFo ... highlight=
K.I.S.S.
-
- bitNinja
- Posts: 883
- Joined: Sat Oct 30, 2004 5:42 pm
- Location: New Zealand