Inspired by CivicsR2Cool....My new project
-
sat4life27
- bitPimp
- Posts: 404
- Joined: Wed Apr 27, 2005 10:48 am
- Location: Warner Vegas, GA
-
LBRC
- bitGangsta'
- Posts: 361
- Joined: Sun May 02, 2004 1:25 am
- Location: North West
- Contact:
-
sat4life27
- bitPimp
- Posts: 404
- Joined: Wed Apr 27, 2005 10:48 am
- Location: Warner Vegas, GA
-
betty.k
- bitPimp
- Posts: 4090
- Joined: Fri Dec 26, 2003 4:52 pm
- Location: la la land
- Contact:
that's where i'm getting my lipo cells from too.LBRC wrote:Aircraft-world.com has the E-Tec 80 cells at a much better price and cheaper shipping. I’ve ordered from them before and had no problems, they ship out of Japan so it takes awhile unless you want to pay more but at a grand total of $22.60 for three I can wait a week or two.
i'm new to all this lipo crap but for where i'm at now (propo micros) they're the perfect cell! just gotta treat them properly, i already killed one of the 250mah's!
i used to be cool
-
DarkTari
- bitPimp
- Posts: 3952
- Joined: Mon Mar 03, 2003 2:48 pm
- Location: D.C. GoGo! In Da House
I'm new to Lipo's also, how are you charging them and does it makeLBRC wrote:Aircraft-world.com has the E-Tec 80 cells at a much better price and cheaper shipping. I’ve ordered from them before and had no problems, they ship out of Japan so it takes awhile unless you want to pay more but at a grand total of $22.60 for three I can wait a week or two.
a difference if you have the T-80 or the T-250 ?
-
betty.k
- bitPimp
- Posts: 4090
- Joined: Fri Dec 26, 2003 4:52 pm
- Location: la la land
- Contact:
the 80mah cells are really small, that's the one lbrc used in his removeable lipo zzse. like 12 x 10mm.
the 250mah is the size of a bit pcb. it fits perfectly in a dg master once you lose the stock pcb!
when charging lipo you can't charge them more than 1c. (c = capacity of the batt. so with the 80mah batt 1c = 80ma) so you need to make sure you have a lipo charger that can go that low.
the 250mah is the size of a bit pcb. it fits perfectly in a dg master once you lose the stock pcb!
when charging lipo you can't charge them more than 1c. (c = capacity of the batt. so with the 80mah batt 1c = 80ma) so you need to make sure you have a lipo charger that can go that low.
Last edited by betty.k on Sat May 28, 2005 2:15 am, edited 1 time in total.
i used to be cool
-
LBRC
- bitGangsta'
- Posts: 361
- Joined: Sun May 02, 2004 1:25 am
- Location: North West
- Contact:
LoL timing is everything as I’m reading that the delivery confirmation email pops up and it’s all about shipping to USA and Australia.betty.k wrote:
that's where i'm getting my lipo cells from too.
i'm new to all this lipo crap but for where i'm at now (propo micros) they're the perfect cell! just gotta treat them properly, i already killed one of the 250mah's!
Dam small world, except when you have an idea that needs a battery are you the 4 days they’re talking about because I'm definitely the 8.Most orders to USA and Australia arrive in 4-8 days but occasionally one takes a few days more. There is no guaranteed delivery time for Parcel post packages to USA and Australia. Allow four weeks.
-
sat4life27
- bitPimp
- Posts: 404
- Joined: Wed Apr 27, 2005 10:48 am
- Location: Warner Vegas, GA
-
civicsr2cool
- bitNinja
- Posts: 521
- Joined: Tue Mar 29, 2005 10:01 pm
- Location: Sagnasty, MI
- Contact:
-
sat4life27
- bitPimp
- Posts: 404
- Joined: Wed Apr 27, 2005 10:48 am
- Location: Warner Vegas, GA
Import Racer... Part 2
Decided I wanted to make another Import Racer car and what better body then then new Skyline. So far I got the chassis stretched and rear wheels modded. This one will most likely get a ZZMT motor. I am thinking of getting a IW02 pcb and some more lipo's (the ones I ordered for the other one was DOA so I sent them back and waiting for replacements).
Edit: Got the front wheels done.
Edit: Got the front wheels done.
