can you help me?

micromatch · Post by **micromatch** » Mon Apr 05, 2004 4:37 pm

hello my car is having some problems at the moment...its not turning and so i checked the steering wires and they were all connected perfectly fine no damage done on them. then i checked my other wires and there all connected too. so what might be my problem?

any input welcome
thanks
-micro

Skyline_GTR_34 · Post by **Skyline_GTR_34** » Mon Apr 05, 2004 4:41 pm

is it a zip or bit? well ne ways somthing happend to mine and the pcb was scraping on the tire so i pushed it back and unscrewd the screw and put a tire in there and its doing fine better than my new one.
(my zipzap se)

Sky

micromatch · Post by **micromatch** » Mon Apr 05, 2004 4:49 pm

its a original bcg mosfetted and i tryed turning it with no wheels and just the magnet and magnet holder and it still didnt work

thanks for trying
-micro

hogjowlz · Post by **hogjowlz** » Mon Apr 05, 2004 4:53 pm

sounds like metal under the chassis. or the rear axle is loose. take the wheels off and reglue

micromatch · Post by **micromatch** » Mon Apr 05, 2004 4:57 pm

my axle is already jbwelded and there is no metal under the chassis. also please keep in mind its not turning at all

thanks for tryin hog
-micro

Skyline_GTR_34 · Post by **Skyline_GTR_34** » Mon Apr 05, 2004 5:14 pm

check the inside of controler.. check if ne wires broke free, thats what happend to my original and had to put a jumper wire in cuz it wasent turning.

micromatch · Post by **micromatch** » Mon Apr 05, 2004 5:29 pm

nope it wasent my controller

Skyline_GTR_34 · Post by **Skyline_GTR_34** » Mon Apr 05, 2004 5:43 pm

damn dood u got a real problem ther, sorry i wont b able to help u

but im sure some of the other pimps would like too

Sky

micromatch · Post by **micromatch** » Mon Apr 05, 2004 5:53 pm

i know thanks for trying tho

micromatch · Post by **micromatch** » Mon Apr 05, 2004 6:05 pm

anyone else? please help

-micro

Post by **CaboWabo** » Mon Apr 05, 2004 6:11 pm

steering magnet?
or - are your steering wires crossed and all mushed overlapping eachother?
if so, straighten them as much as possible, you might have a short.

micromatch · Post by **micromatch** » Mon Apr 05, 2004 6:44 pm

i had the wires from the left coil soldered to the L and R pads and i had the right coil soldered to the postive pad and i just soldered them back

thanks guys

hogjowlz · Post by **hogjowlz** » Mon Apr 05, 2004 6:54 pm

"look at the big brains on brad here"