Slight problem with my ZZMT

[Maxximum Attack]

I'm having a little trouble with the charging situation. I'm using the 4-cell pod from a ZZSE controller and wired it onto a plug. I'm trying to use this to charge my ZZMT (now with a working SE battery)

1. Do I wire the batts up in series with the "charging" battry pod, or do I wire in parallel?

2. With the wireing correct, do I turn the car on to charge it? (I'm running direct to the battery not through a Tx)

3. I bridged the terminals on the PCB where the current is input, I'm using a ZZSE cell now and I'm getting power going to the board. Is it because the batts are dead and need charging that I'm not getting motion from the truck?

4. How can I rig one of my ZZSE chargers to charge my truck. Which terminals do I bridge with my plug in order to make it to charge? The +ve and -ve terminals offer very littl volts, how do I increase them.


I'm using a wired motor to test for voltage, the difference in speed (sound) tells me what I need to know.

I thought I'd get more exposure here...

Let me know
Maxx