k guys, finally got some pics.
- BoneyskinX5
- bitHood
- Posts: 39
- Joined: Mon Apr 11, 2005 3:36 pm
k guys, finally got some pics.
This is my first time painting a 1/64th with a rattle can. I went a little too thick, and didn't mask good (because I didn't have an X-acto to get perfect cuts). So without further a-do..


I got a 6.0 motor running in there, Xmod tires and rims painted black, painted monster truck body.
Im going to add an Iwaver board sometime soon.
Ill get more pics if you pimps want em.


I got a 6.0 motor running in there, Xmod tires and rims painted black, painted monster truck body.
Im going to add an Iwaver board sometime soon.
Ill get more pics if you pimps want em.
- BoneyskinX5
- bitHood
- Posts: 39
- Joined: Mon Apr 11, 2005 3:36 pm
Turn radius is a little better because all tires are on the ground. The first thing you ever notice with an SE is that when it turns, it turns with three tires on the ground.
I'll try to get some pics once my uncle comes.
EDIT:
You can see a bit more of the rim here (this was the first pic I took in the digi cam)

Its basicly ZIPZAP RIM>SUPERSLICK RIM PAINTED RED> XMOD RIM.
I got the rim to go straight with the Front Axles of the xmod rim, through the xmod rim, through the superslick rim, and through the zipzap rim.
If anyone wants it, I can make a full tut if I can get the pics.
I'll try to get some pics once my uncle comes.
EDIT:
You can see a bit more of the rim here (this was the first pic I took in the digi cam)

Its basicly ZIPZAP RIM>SUPERSLICK RIM PAINTED RED> XMOD RIM.
I got the rim to go straight with the Front Axles of the xmod rim, through the xmod rim, through the superslick rim, and through the zipzap rim.
If anyone wants it, I can make a full tut if I can get the pics.
- BoneyskinX5
- bitHood
- Posts: 39
- Joined: Mon Apr 11, 2005 3:36 pm
- betty.k
- bitPimp
- Posts: 4090
- Joined: Fri Dec 26, 2003 4:52 pm
- Location: la la land
- Contact:
- BoneyskinX5
- bitHood
- Posts: 39
- Joined: Mon Apr 11, 2005 3:36 pm