Newest 1/64 offroad.

Use this gallery to show off your own garage of sleds - everything 1:32 and smaller - no matter if they be bangin, slangin, or just barely hangin.
User avatar
ibjamn
bitDisciple
Posts: 1056
Joined: Thu Mar 30, 2006 9:09 pm
Location: right here, waiting

Re: Newest 1/64 offroad.

Post by ibjamn »

Body is just held on by small pieces of high density foam (with ahdesive on one side) stuck to the outsides of the chassis, one on each side. The front of the body rests on top of the board and the high plastic toward the front and the body is just held on by the pressure of the foam. It's pretty secure.
The axle is K&S steel rod bought from a local hardware store, and is a bit larger that stock axle. There are small diameter rods available, but I already had this one. I had to drill out the gear, the chassis and the stock ZZ wheels to get them to fit onto it. And I put a small cylindrical piece of plastic on the opposite side of the drive gear to hold the axle in place at the rear assembly.

When I to do a how-to on the front end, which would you guys rather see?
A Cars generation Zip, or a ZZSE? the only difference would be the steering mechanics, the suspension assembly is relatively the same.
I say those, because I don't think a coil driven steering will work well enough, I really think a gear driven steering would be best being that it uses a motor to get it's torque.
User avatar
Smoke&Mirrors
bitGangsta'
Posts: 258
Joined: Sun Feb 10, 2008 1:52 am
Location: Nor Cal

Re: Newest 1/64 offroad.

Post by Smoke&Mirrors »

I think I would probably prefer the Cars gen. zipzap (that's the same as the transformers and 3rd gen right? Fast servo) because 1. the steering rate is faster and 2. I don't know about the rest of you guys, but my ZZSE supply is getting low and I've still got plenty of those fast little Baricarde's. :-)
Project Willy
ZZMT
-Articulation Mod
-288:1 Gear Ratio
-BB Steering Servo
-Extended Wheelbase
-Widened Axles
-Polaris ATV Tires
-Dean Plugs
-1:35 Scale Willy's Flatfender body
Sqwalerrr
bitPlaya'
Posts: 154
Joined: Thu Mar 05, 2009 9:34 am
Location: mothers basement

Re: Newest 1/64 offroad.

Post by Sqwalerrr »

Na it's too long to be a teraintitan axle he just did the front first and then saw what wheelbase he was dealing with and then he rather went to a craft store to get some tubeing. Then he cut that down to size. Soooooo yea that's how I think he did that. And ibj what is the steering ratious like on the little bugger?

EDIT: sorry ibj I didn't know you had alerady awnserd that
Last edited by Sqwalerrr on Fri Dec 04, 2009 3:26 pm, edited 1 time in total.
hello world! Prepare for the gayness
_________________________________
The answer to all of life's questions is 7
User avatar
Smoke&Mirrors
bitGangsta'
Posts: 258
Joined: Sun Feb 10, 2008 1:52 am
Location: Nor Cal

Re: Newest 1/64 offroad.

Post by Smoke&Mirrors »

Sqwalerrr wrote:Na it's too long to be a teraintitan axle he just did the front first and then saw what wheelbase he was dealing with and then he rather went to a craft store to get some tubeing. Then he cut that down to size. Soooooo yea that's how I think he did that.
No shit Sherlock. Did you deduce that on your own or was it what Ibjamn said that solved the mystery? Image
Ibjamn wrote:The axle is K&S steel rod bought from a local hardware store, and is a bit larger that stock axle.
Project Willy
ZZMT
-Articulation Mod
-288:1 Gear Ratio
-BB Steering Servo
-Extended Wheelbase
-Widened Axles
-Polaris ATV Tires
-Dean Plugs
-1:35 Scale Willy's Flatfender body
Sqwalerrr
bitPlaya'
Posts: 154
Joined: Thu Mar 05, 2009 9:34 am
Location: mothers basement

Re: Newest 1/64 offroad.

Post by Sqwalerrr »

I didn't know that there was another page.
hello world! Prepare for the gayness
_________________________________
The answer to all of life's questions is 7
User avatar
ibjamn
bitDisciple
Posts: 1056
Joined: Thu Mar 30, 2006 9:09 pm
Location: right here, waiting

Re: Newest 1/64 offroad.

Post by ibjamn »

:lol:
that's funny...

Actually, I did the rear first. Then after assembling the front wheels to the c-hubs, I lined up the wheelbase to determine the length of the arms for the front.... :wink:
Sqwalerrr
bitPlaya'
Posts: 154
Joined: Thu Mar 05, 2009 9:34 am
Location: mothers basement

Re: Newest 1/64 offroad.

Post by Sqwalerrr »

and the steering? :|
hello world! Prepare for the gayness
_________________________________
The answer to all of life's questions is 7
User avatar
ibjamn
bitDisciple
Posts: 1056
Joined: Thu Mar 30, 2006 9:09 pm
Location: right here, waiting

Re: Newest 1/64 offroad.

Post by ibjamn »

...was last, and still not 100% functional.... return to center being the reason as stated earlier.
I can be a bit of a perfectionist with some things.... :(
Sqwalerrr
bitPlaya'
Posts: 154
Joined: Thu Mar 05, 2009 9:34 am
Location: mothers basement

Re: Newest 1/64 offroad.

Post by Sqwalerrr »

Have you made any little jumps outa cards or drive it outside yet?
And the steering I would take the front end apart (if it's not to much trobble) and sand every thng down a little bit and see if that helps
hello world! Prepare for the gayness
_________________________________
The answer to all of life's questions is 7
frizzen
bitDisciple
Posts: 1729
Joined: Wed Aug 03, 2005 7:48 am
Location: Big Left Turn, Indiana
Contact:

Re: Newest 1/64 offroad.

Post by frizzen »

I'd rather see a Cars or later ZZ donor platform. The SE was only really good if you did a duty-cycle mod (how many years has that been unavailable?) on them and fought with them a lot to get decent steering. Cars or later are really good if you just remove a resistor.

Fix it right, not just wimp out and do 2 steering springs...
Jack of all trades, master of none; yet often better than master of one.
-
End genital mutilation, don't circumcise. Restore your fore'
User avatar
DarkTari
bitPimp
Posts: 3952
Joined: Mon Mar 03, 2003 2:48 pm
Location: D.C. GoGo! In Da House

Re: Newest 1/64 offroad.

Post by DarkTari »

Fuckin good Job Jam !!!!
This breaks new ground for you, glad to know you still "Jammin" !!
Image
tyhodge07
bitThug
Posts: 94
Joined: Wed Apr 16, 2008 1:46 pm
Location: Indpls, IN
Contact:

Re: Newest 1/64 offroad.

Post by tyhodge07 »

i ended up finding the body i made like 3-4 years ago for the 1/64 stadium truck i started but never finished. the chassis i started is long gone with the lipo battery and board, lol. anyways, heres the body i came up with, modeled after the micro-t, lets see the write up on how this was done so i can get this body on something and being used :)
You do not have the required permissions to view the files attached to this post.
tyhodge07
bitThug
Posts: 94
Joined: Wed Apr 16, 2008 1:46 pm
Location: Indpls, IN
Contact:

Re: Newest 1/64 offroad.

Post by tyhodge07 »

last pic
You do not have the required permissions to view the files attached to this post.
User avatar
vwmicrosizer
bitGimp
Posts: 196
Joined: Sun Jul 13, 2008 2:42 am
Location: Alaska, usa

Re: Newest 1/64 offroad.

Post by vwmicrosizer »

Damn when I first saw that i thought it was a micro t.
Sqwalerrr
bitPlaya'
Posts: 154
Joined: Thu Mar 05, 2009 9:34 am
Location: mothers basement

Re: Newest 1/64 offroad.

Post by Sqwalerrr »

Being the natural noob I am, Ima go head and ask....
any more progress to getting closer to a vid with the lil bugger? How bout that tut?just wonderin! :wink: hehehehe..... I really wanna see this thing work man! :eek:
oh, and I'd like to see a how to on a se, considering I have about three stripped se chassis with the rear music spring set up just waiting for a working front end....... But I can live with whatever you deside on doing....

Luv y'all! ;-)
hello world! Prepare for the gayness
_________________________________
The answer to all of life's questions is 7
Post Reply