Chevy Nova in the works.
- sat4life27
- bitPimp
- Posts: 404
- Joined: Wed Apr 27, 2005 10:48 am
- Location: Warner Vegas, GA
Chevy Nova in the works.
What's up pimps? It have been a few months since I have really done any modding. I decided to work on a project I started aways back. Anyway here is what I got so far. Starting with a Chevelle ZZ body, looks very similar to a 70 Nova.
The hood and grill came off of a Pro Rodz 70 Nova diecast.
The wheels are off a Dubs Muscle car (just sitting under body)
and the axle gear is from a shitty cheap slotcar set we sell at the ratshack. The gear will allow me to tuck the fatties under the body.
I still have alot of work on getting a chassis modded to work with the gear setup. I have to make a new axle mount and motor mount since the motor will now need to be moved. Plus figure out how to fit it all under the body.It still has a long way to go.
The hood and grill came off of a Pro Rodz 70 Nova diecast.
The wheels are off a Dubs Muscle car (just sitting under body)
and the axle gear is from a shitty cheap slotcar set we sell at the ratshack. The gear will allow me to tuck the fatties under the body.
I still have alot of work on getting a chassis modded to work with the gear setup. I have to make a new axle mount and motor mount since the motor will now need to be moved. Plus figure out how to fit it all under the body.It still has a long way to go.
- crazydave
- bitPimp
- Posts: 6874
- Joined: Thu Apr 17, 2003 9:05 am
- Location: Koolsville
Old Novas are easily in my top 5, so I'm gonna love to see you pull this off.
I love the hood. When I was a kid my dad would take me to the drags to watch my next door neighbor race, and he had a '70 Nova, with that same hood, except his was the natural white, because he never got around to painting his car.
The grill is looking a tad off to me. Is it too narrow maybe?
I love the hood. When I was a kid my dad would take me to the drags to watch my next door neighbor race, and he had a '70 Nova, with that same hood, except his was the natural white, because he never got around to painting his car.
The grill is looking a tad off to me. Is it too narrow maybe?
- sat4life27
- bitPimp
- Posts: 404
- Joined: Wed Apr 27, 2005 10:48 am
- Location: Warner Vegas, GA
Thanks CD and DT, good to be back in action...
The grille is a little short for the body. I will try to round off the fenders a little to make it look more better.
After a few hours of cutting and trimming, I managed to get the rear end installed. I used the back half of the pro rodz chassis and fused it to the SEs.
Turned out pretty good I do think. Now I need to figure out how to mount the motor and shit.
The grille is a little short for the body. I will try to round off the fenders a little to make it look more better.
After a few hours of cutting and trimming, I managed to get the rear end installed. I used the back half of the pro rodz chassis and fused it to the SEs.
Turned out pretty good I do think. Now I need to figure out how to mount the motor and shit.
- DarkTari
- bitPimp
- Posts: 3952
- Joined: Mon Mar 03, 2003 2:48 pm
- Location: D.C. GoGo! In Da House
-
- bitPlaya'
- Posts: 148
- Joined: Sat Sep 27, 2003 11:40 pm
- Location: Mandan ND
Good luck. I love novas, we have one.
http://img154.imageshack.us/img154/3094/nova3xs.jpg
http://img154.imageshack.us/img154/3094/nova3xs.jpg
- crazydave
- bitPimp
- Posts: 6874
- Joined: Thu Apr 17, 2003 9:05 am
- Location: Koolsville
Nice, and I love the 396, good motor.blindrider3 wrote:Good luck. I love novas, we have one.
http://img154.imageshack.us/img154/3094/nova3xs.jpg
That's a good reference too, see how the grill starts wrap around the side? I think that's what I was talking about before.
- sat4life27
- bitPimp
- Posts: 404
- Joined: Wed Apr 27, 2005 10:48 am
- Location: Warner Vegas, GA
Thats one kickass Nova blindrider!
I managed to get the grille aligned about as good as I can get it now.
The diecast car was a little narrow compared to the ZZ body but I think it works.
I also buttoned up the chassis as far as getting the wheels modded, mounted, and the motor installed.
Now all I need to figure out is what kind of power source to squeeze in and get the the elecronics reinstalled.
Then a little more shaping of the body. So far I rounded off the rear and front fenders to match the Nova.
I managed to get the grille aligned about as good as I can get it now.
The diecast car was a little narrow compared to the ZZ body but I think it works.
I also buttoned up the chassis as far as getting the wheels modded, mounted, and the motor installed.
Now all I need to figure out is what kind of power source to squeeze in and get the the elecronics reinstalled.
Then a little more shaping of the body. So far I rounded off the rear and front fenders to match the Nova.
-
- bitPimp
- Posts: 4293
- Joined: Mon Dec 16, 2002 1:10 pm
- Location: on vacation in Vaporville
- Contact:
Awesome man... I too love a killer hoosier Nova. Funny side note. Novas never got marketed in spanish speaking countries, cause Nova in spanish means "doesn't go"....lol
Looks real good sat. Another one of my favs is the "Dart".. Awesome cars.
silla
Looks real good sat. Another one of my favs is the "Dart".. Awesome cars.
silla
payaso......
"Imagination is everything. It's the preview to lifes coming attractions" -Albert Einstein
"Imagination is everything. It's the preview to lifes coming attractions" -Albert Einstein
- ynad
- bitNinja
- Posts: 776
- Joined: Fri Apr 30, 2004 12:22 am
- Location: NYC/NJ
- steelwoolghandi
- bitPimp
- Posts: 1696
- Joined: Fri Jun 11, 2004 11:53 am
- Location: RIGHT BEHIND YOU!!
- Contact:
-
- bitPlaya'
- Posts: 148
- Joined: Sat Sep 27, 2003 11:40 pm
- Location: Mandan ND
It ain't a 396, it's a 427 built up to a (I think) 496crazydave wrote:Nice, and I love the 396, good motor.blindrider3 wrote:Good luck. I love novas, we have one.
http://img154.imageshack.us/img154/3094/nova3xs.jpg
That's a good reference too, see how the grill starts wrap around the side? I think that's what I was talking about before.
I like how your projects going too sat4life27.
- sat4life27
- bitPimp
- Posts: 404
- Joined: Wed Apr 27, 2005 10:48 am
- Location: Warner Vegas, GA
Here you go ynad It comes with some other stuff that maybe useful also. Ohh and let me know if you can't find any. We have like 20 at my store.ynad wrote:can you provide a little more info, please. i'd go and ask at the local RS.the axle gear is from a shitty cheap slotcar set we sell at the ratshack.
i just want to appear like i know something.
oh yeah, car looks 100%
Thanks SWG, After seeing all the great rides you guys have been putting out in my absense. I felt I had to come back with something worth while.steelwoolghandi wrote:Sat man your away for a while and dang you show up with one hot ride that is just some sweet work! I like the stance of that and the way you set up the gears to tub the wheels is spot on!
Can't wait to see the finished product I might have to copy this one!
Now I need to prep the body for paint and cross my fingers I don't mess it up.
- crazydave
- bitPimp
- Posts: 6874
- Joined: Thu Apr 17, 2003 9:05 am
- Location: Koolsville
Cool, I like the 427 even better.blindrider3 wrote:It ain't a 396, it's a 427 built up to a (I think) 496crazydave wrote:Nice, and I love the 396, good motor.blindrider3 wrote:Good luck. I love novas, we have one.
http://img154.imageshack.us/img154/3094/nova3xs.jpg
That's a good reference too, see how the grill starts wrap around the side? I think that's what I was talking about before.
I like how your projects going too sat4life27.
Oh you know something already. "Hey, you guys got one of them shity cheap slot cars?"ynad wrote:can you provide a little more info, please. i'd go and ask at the local RS.the axle gear is from a shitty cheap slotcar set we sell at the ratshack.
i just want to appear like i know something.
Good work S4L, its already starting to take some shape.
- sat4life27
- bitPimp
- Posts: 404
- Joined: Wed Apr 27, 2005 10:48 am
- Location: Warner Vegas, GA
Got a little more work done today. I got the chassis finished. Well I still need to attach the antenna and install the power source. I have some 90mah etec lipos on order and hope (pray) that one will fit. I am going to try to squeeze it in along the trunk line under the body above the rear wheels. I have left a slot in the back of the body in hopes it will fit just right. Ohh I also changed out the wheels with some SS rallye wheels.
I also got the body painted and clear coated. I used charcoal metallic duplicolor and clear coat. Once it fully dries I will finish it up and try to get some beauty shots.
Edit: Ok I let it dry and got it together. WARNING!!! this picture is horrible and I will get a good picture tonight while at work if I can. But anyways ere it is.
I also got the body painted and clear coated. I used charcoal metallic duplicolor and clear coat. Once it fully dries I will finish it up and try to get some beauty shots.
Edit: Ok I let it dry and got it together. WARNING!!! this picture is horrible and I will get a good picture tonight while at work if I can. But anyways ere it is.