ZZ SE MOSFET mods are GO!!!
-
- Posts: 19
- Joined: Wed Apr 30, 2003 6:46 am
- Location: Melbourne, Australia
- Contact:
ZZ SE MOSFET mods are GO!!!
Well after much hard work and experimentation I have successfully mosfet modded a ZipZap SE to have a significant increase in speed and torque as well.
The stock ZZ SE with a red 21.5 motor and blue (12:1) gears trundles along at a pitiful 4.5km/h (about 3mph) which is a real yawn.
I delved in the the driving/switching circuits and came up with a way to triple the driving speed of the car, increase the torque and keep all the proportionality of the control, both in speed and steering.
It now loves the high speed motors and the tall gears.
If you put in a purple 3.4 'turbo' motor, and the red gears (8.25:1) it will now scream along at around 13 km/h (around 8.5 mph) with full speed control in a smooth range from 5 to 13 km/h (3 to 8.5 mph).
It takes the best corners, with the propo control it will turn wide or sharp, but all the time you are in total control.
It is kinda strange to have such good control of these tiny cars at these speeds, but hey I'm not complaining.
I am once again offering to do these mode for people to their cars. In short, you send me your car, I mod it, test it, and send it straight back to you. All the info is on my website, including prices etc, (have a good look around), then email me and we can get things happening from there.
uA
The stock ZZ SE with a red 21.5 motor and blue (12:1) gears trundles along at a pitiful 4.5km/h (about 3mph) which is a real yawn.
I delved in the the driving/switching circuits and came up with a way to triple the driving speed of the car, increase the torque and keep all the proportionality of the control, both in speed and steering.
It now loves the high speed motors and the tall gears.
If you put in a purple 3.4 'turbo' motor, and the red gears (8.25:1) it will now scream along at around 13 km/h (around 8.5 mph) with full speed control in a smooth range from 5 to 13 km/h (3 to 8.5 mph).
It takes the best corners, with the propo control it will turn wide or sharp, but all the time you are in total control.
It is kinda strange to have such good control of these tiny cars at these speeds, but hey I'm not complaining.
I am once again offering to do these mode for people to their cars. In short, you send me your car, I mod it, test it, and send it straight back to you. All the info is on my website, including prices etc, (have a good look around), then email me and we can get things happening from there.

micro fet mod, BCG, ZZ, website => MicroAmps homepage website
-
- Site Admin
- Posts: 10259
- Joined: Tue Dec 10, 2002 4:05 pm
- Location: The Adult Table
- Contact:
right on - that's one source already for fet se's!
any challengers going to make another source? lol
gonna move this baby over to Da Hook Up
any challengers going to make another source? lol
gonna move this baby over to Da Hook Up
Dear Life Cereal, Where do you get off? Part of a balanced breakfast and delicious? Who do you think you are? By now you may have guessed I'm speaking ironically and have nothing but good things to say about what you do. Life cereal do not change a thing.
- bdebde
- bitPlaya'
- Posts: 129
- Joined: Thu May 08, 2003 8:47 pm
- Location: Washington (in a van down by the river)
ZZ SE MOSFET mods are GO!!!
And go they do! I got my SE back from micro_amps today, I gotta say I love it. This is the way they should have went from the start. They run red gears with more torque than a stock one with blue gears. You can actually use the throttle to help steer (kick the back end around). There should be some good drift action with these and the right tire combo. Now that these SE's have good power and speed, I will not be getting any xmods.
Scotty, beam me up.
-
- bitPimp
- Posts: 4293
- Joined: Mon Dec 16, 2002 1:10 pm
- Location: on vacation in Vaporville
- Contact:
- bdebde
- bitPlaya'
- Posts: 129
- Joined: Thu May 08, 2003 8:47 pm
- Location: Washington (in a van down by the river)
Check out the "Quick" video of my fet modded SE:
http://www.bitpimps.lixlink.com/pages/p ... php?t=2424
http://www.bitpimps.lixlink.com/pages/p ... php?t=2424
Scotty, beam me up.
-
- bitPimp
- Posts: 1266
- Joined: Sun Aug 17, 2003 12:34 pm
- Location: Canada
- Contact:
Maybe soon we will get a tutStalker wrote:You took tha words out of my mouth !noxorc wrote:So MAmp.... you gonna show us how you did it?
a schemetic or drawing would help.?
All we can do is hope and wait

Last edited by VooDooMafia on Wed Nov 19, 2003 11:56 pm, edited 1 time in total.

I Don't care what you say PIMPIN aint easy, you Broke A$$ Mother F*&Ker
-
- bitPimp
- Posts: 4293
- Joined: Mon Dec 16, 2002 1:10 pm
- Location: on vacation in Vaporville
- Contact:
Stalker wrote:You took tha words out of my mouth !noxorc wrote:So MAmp.... you gonna show us how you did it?
a schemetic or drawing would help.?
If you send him the car, you'll be able to see what he did after you get it back..
silla

payaso...... 
"Imagination is everything. It's the preview to lifes coming attractions" -Albert Einstein

"Imagination is everything. It's the preview to lifes coming attractions" -Albert Einstein
-
- bitPimp
- Posts: 1266
- Joined: Sun Aug 17, 2003 12:34 pm
- Location: Canada
- Contact:
Was your PBC not covered in epoxy?payaso wrote:Stalker wrote:You took tha words out of my mouth !noxorc wrote:So MAmp.... you gonna show us how you did it?
a schemetic or drawing would help.?
If you send him the car, you'll be able to see what he did after you get it back..
silla
That was one of the reasons I didn't wnt to send it cause the epoxy will limit the future mods on it.

I Don't care what you say PIMPIN aint easy, you Broke A$$ Mother F*&Ker
- micromatch
- bitGangsta'
- Posts: 367
- Joined: Mon Jul 28, 2003 7:28 pm
- Location: Bay Area califoolyah
great job microamps glad to hear you found it out maybe i should send you one of mine 

Last edited by micromatch on Fri Nov 21, 2003 6:12 pm, edited 1 time in total.
is this thing on?
-
- bitNinja
- Posts: 587
- Joined: Wed Aug 06, 2003 2:30 pm
Guys, use your common sense. If he showed us how he did it, then people would do it themselves without him gettin the dough. I even emailed him and asked him for a tutorial and he said something like, "I don't have a tutorial on how it's done, but if you pay me 20 dollars and send the car, I'll do it for you." THINK about what you guys are asking. He's like the owner of a cookie factory, if everyone knows the secret recipe then they'll make it themselves and he'll go outta business. Chances are very slim he'll put up a tutorial. 

-
- bitPimp
- Posts: 1266
- Joined: Sun Aug 17, 2003 12:34 pm
- Location: Canada
- Contact:
Son_Gokou wrote:Guys, use your common sense. If he showed us how he did it, then people would do it themselves without him gettin the dough. I even emailed him and asked him for a tutorial and he said something like, "I don't have a tutorial on how it's done, but if you pay me 20 dollars and send the car, I'll do it for you." THINK about what you guys are asking. He's like the owner of a cookie factory, if everyone knows the secret recipe then they'll make it themselves and he'll go outta business. Chances are very slim he'll put up a tutorial.
Not to worry it will be figured out soon enough then there will be tuts on it.

I Don't care what you say PIMPIN aint easy, you Broke A$$ Mother F*&Ker