Xmods EVO Group Buy (Updated 3/14/06)

cj · Post by cj » Sat Nov 05, 2005 6:11 am

chrome wrote:My complete order is:

XME018A-ALLOY MOTOR HEAT SINK - 1PC
XME021-ALLOY FRONT KNUCKLE ARM - 1PR
XME022-ALLOY REAR KNUCKLE ARM -1 PR
XME039F-ALLOY FRONT WHEEL SHAFT - 1PR
XME039R-ALLOY REAR UNIVERSAL SWING SHAFT (CVD DESIGN) - 1PR
XME055-ALLOY FRONT LOWER ARM - 1PR
XME056-ALLOY REAR LOWER ARM - 1PR

I'd like all of these in Black

Got it.

Also, can you give a rough date on when you will need the dough? Whether it's a timeframe of weeks or months would be fine. Money's tight and I'll have to spend accordingly.

Later,
Chrome...

Based on the responces I'll announce the order date soon.

One more question, are you planning on stocking some more of the parts or is this deal order only? That may change my order as well.

Yes!! I am planning on stocking parts as well so I will not have to require that we get 10 or more before you will recieve the discounted prices. I only need 7.

sg219 wrote:Final answer.

1 set for the TRUCK in SILVER.

1 set for the car in GREEN.

Same deal as Chrome about the cash. Let me know how much and how long.

Thanks CJ.

Which clips Lancer, Mustang, Truck, or Hummer?

sg219 · Post by **sg219** » Sat Nov 05, 2005 3:34 pm

cj wrote:
sg219 wrote:Final answer.

1 set for the TRUCK in SILVER.

1 set for the car in GREEN.

Same deal as Chrome about the cash. Let me know how much and how long.

Thanks CJ.
Which clips Lancer, Mustang, Truck, or Hummer?

Can I have one of each?

If not, I'll take the Mustang and Truck.

skylinekid · Post by **skylinekid** » Sat Nov 05, 2005 6:25 pm

cj wrote:
chrome wrote:My complete order is:

XME018A-ALLOY MOTOR HEAT SINK - 1PC
XME021-ALLOY FRONT KNUCKLE ARM - 1PR
XME022-ALLOY REAR KNUCKLE ARM -1 PR
XME039F-ALLOY FRONT WHEEL SHAFT - 1PR
XME039R-ALLOY REAR UNIVERSAL SWING SHAFT (CVD DESIGN) - 1PR
XME055-ALLOY FRONT LOWER ARM - 1PR
XME056-ALLOY REAR LOWER ARM - 1PR

I'd like all of these in Black
Got it.

Also, can you give a rough date on when you will need the dough? Whether it's a timeframe of weeks or months would be fine. Money's tight and I'll have to spend accordingly.

Later,
Chrome...
Based on the responces I'll announce the order date soon.

One more question, are you planning on stocking some more of the parts or is this deal order only? That may change my order as well.
Yes!! I am planning on stocking parts as well so I will not have to require that we get 10 or more before you will recieve the discounted prices. I only need 7.

sg219 wrote:Final answer.

1 set for the TRUCK in SILVER.

1 set for the car in GREEN.

Same deal as Chrome about the cash. Let me know how much and how long.

Thanks CJ.
Which clips Lancer, Mustang, Truck, or Hummer?

Did you get my order of 1 car set with the Mustang clip in GREEN

chrome · Post by **chrome** » Sat Nov 05, 2005 6:59 pm

To my order I'd like to add

XME316F-ALLOY FRONT DAMPER (16MM) -1PR
XME316R-ALLOY REAR DAMPER (16MM) - 1PR

In Red.

Thanks.

Later,
Chrome...

cj · Post by cj » Tue Nov 08, 2005 8:55 am

I am tossing this out to all interested. Since GPM has not given any info out on the Gearboxes would you be willing to order as is and maybe get the gear boxes later or wait and order all at once?

Advantage of ordering as is now we can see the parts sooner.
If we wait then we may have to wait longer for the shipment to arrive.

chrome · Post by **chrome** » Tue Nov 08, 2005 9:30 am

I'm not really interested in the gearboxes, and the only way I would be is if there was the second level of the discount applied. As for waiting, I'm game anytime. Do we have any idea on when GPM would announce it or are you just stating it as you hear it?

Later,
Chrome...

cj · Post by cj » Tue Nov 08, 2005 9:50 am

chrome wrote:I'm not really interested in the gearboxes, and the only way I would be is if there was the second level of the discount applied. As for waiting, I'm game anytime. Do we have any idea on when GPM would announce it or are you just stating it as you hear it?

Later,
Chrome...

As soon as I get the email from GPM with prices I'll post it. I just want these parts on my hands NOW. The only problem I see is that the screws that GPM will provide will work on the Alloy but not the plastic. Buy we can modify until then.

sg219 · Post by **sg219** » Tue Nov 08, 2005 9:53 am

Get the stuff now and order the rest later. As much as possible, before Xmas.

The closer it gets to Xmas, the less I can spend on toys for myself.

chrome · Post by **chrome** » Tue Nov 08, 2005 9:59 am

What do you mean by screws into the plastic cj? I'm a little lost there. And yeah, I completely forgot about Xmas, so before then is good.

Later,
Chrome...

cj · Post by cj » Tue Nov 08, 2005 10:09 am

sg219 wrote:Get the stuff now and order the rest later. As much as possible, before Xmas.

The closer it gets to Xmas, the less I can spend on toys for myself.

I know the feeling

OK then I am setting and end date on this group buy!

The end date will be November 18th.

Please make sure I have your Complete parts list. The order will be placed the 18th of November. I ask that by November 21st you PayPal me the full amount. I'll post what you need to pay exactly. Since the gear boxes are not part of this S&H will be for USA and Canada will be $3.00 for 1 complete kit, $1.00 for each additional. UK add $8.00 and Australia add $4.00. If you are only after a few pieces then shipping will be cheaper.

sg219 · Post by **sg219** » Tue Nov 08, 2005 10:21 am

I'll re-post it just to be clear.....

1 full set of EVO car in GREEN. (stang clip)

1 full set of EVO truck in SILVER. (truck clip F-150 style)

I would like one of each front clip if possible.

cj · Post by cj » Tue Nov 08, 2005 10:22 am

chrome wrote:What do you mean by screws into the plastic cj? I'm a little lost there. And yeah, I completely forgot about Xmas, so before then is good.

Later,
Chrome...

In the first generation with the original Xmods if you got the front and rear arms the screws that came with them would not fit if you had the stock plastic gearboxes. Had to make the hole a fraction bigger or back off the screws or the would bind. Plus the front arms would bind on the plastic front top plate. Guess when we get them we will have to post were everyone had problems so we can get GPM to make any changes.

sg219 · Post by **sg219** » Tue Nov 08, 2005 10:24 am

Speakin' of problems, I still need the front upper arms for the OG Xmods in green.

Did they fix that?

If so, throw a set of them on the order.

cj · Post by cj » Tue Nov 08, 2005 10:40 am

sg219 wrote:Speakin' of problems, I still need the front upper arms for the OG Xmods in green.

Did they fix that?

If so, throw a set of them on the order.

The most recent arm I received look identical to the arm you sent m back. Si I'd say they haven changed anything.

Tell you what though I'll send these green ones you sent back to me as a bonus freebie when I send your order of EVO to you.

BTW: I have asked Clara at GPM if they can do a special color just for me. I'll let you know what the color it is later if they can do it.

chrome · Post by **chrome** » Tue Nov 08, 2005 10:42 am

Okay, to be clear as well

XME018A-ALLOY MOTOR HEAT SINK - 1PC
XME021-ALLOY FRONT KNUCKLE ARM - 1PR
XME022-ALLOY REAR KNUCKLE ARM -1 PR
XME039F-ALLOY FRONT WHEEL SHAFT - 1PR
XME039R-ALLOY REAR UNIVERSAL SWING SHAFT (CVD DESIGN) - 1PR
XME055-ALLOY FRONT LOWER ARM - 1PR
XME056-ALLOY REAR LOWER ARM - 1PR

I'd like all of these in Black

and then these in red.
XME316F-ALLOY FRONT DAMPER (16MM) -1PR
XME316R-ALLOY REAR DAMPER (16MM) - 1PR

Later,
Chrome...