Micromark up to 75% off
Posted: Mon Jun 18, 2007 8:19 am
COMPLETE RESIN CASTING STARTER SET(+)
Item Number: 82698
List Price $95.75
Sale Price $57.60
Our Complete Resin Casting Starter Set contains everything you need to begin resin casting, including one each of the following:
#82083 ONE-to-ONE/RAPID is an economical general purpose mold rubber that is easy to mix: Simply stir equal volumes of A and B together and pour. Use over and over to make many resin castings, even those with slight undercuts. 30 minute pot life, 4 hour cure. De-airs without vacuum. 3.2 lb. kit contains approx. 32 fl. oz. total material.
#82057 CR-600 Casting Resin (provides more time for mixing and pouring) 7 minute pot life; demold in 30 minutes. 2.4 lb. kit contains approx. 32 fl. oz. total material.
#80475 Rubber-To-Rubber Mold Release Required when making 2 part RTV molds. Keeps mold halves from sticking together. 2 fl. oz.
#80476 Klean Klay A special synthetic clay that will not contaminate silicone rubber. Use for containing flow of RTV during mold making and for making simple molds. (Place a little talcum powder on the part and press it into the clay. Then carefully remove the part and pour resin into the cavity.) 1 lb.
#80352 Mixing Set Includes six 8 oz. calibrated plastic mixing cups, six stir sticks, three brushes.
#82664 Rubber-To-Resin Mold Release Makes it easy to remove resin castings from molds. 14 oz. spray.
MINI CONNECTOR KIT, PKG. OF 10
Item Number: 83858
Value $19.95
Sale Price $12.95
Mini Connector Kit for Model Electronics
Kit makes it easy to disconnect motors, lights and other circuitry located inside your models. 2-wire miniature connector bodies are only 3/16 x 1/4 inch x 3/8 inch long when joined. Connector halves snap together to prevent accidental parting. Each connector assembles in just a few minutes. Includes 7 inch wire leads and heat-shrink tubing to prevent shorts. Requires the use of a wire stripper and soldering iron. 4 amp capacity.
