bitPimps.lixlink.com

These little servos are becoming all the rage on micro/mini helis. But since they are very similar in spec to HS50 and HS55 for 1/4 the price they
are awesome for micro r/c car use as well(custom micro-T, xmods, mini-z..etc)

definitly cant beat the price. seller and product have been getting plenty of 5 star ratings.



5g servo $3.49

http://www.unitedhobbies.com/unitedhobb ... roduct=663

Specs (comparable replacement to HS-50)
Size : 22.9x11.4x22 mm / 0.9x0.45x0.87 in
Voltage : 3v ~ 6v
Weight: 5g / 0.18oz
Speed : 0.10 sec/60(4.8V)
Torque : 0.8 kg-cm
Working Temp : -30C~60C
Teflon Bushing, 15cm wire, coreless motor

replacement gears - 99 cents
http://www.unitedhobbies.com/unitedhobb ... oduct=4951




9gr servo $3.65

http://www.unitedhobbies.com/unitedhobb ... roduct=662

Specs (Comparable replacement to HS-55)
Size : 21x12x22 mm / 0.74x0.42x0.78 in
Voltage : 3v ~ 6v
Weight: 9g / 0.32oz
Speed : 0.12 sec/60(4.8V)
Torque : 1.6 kg-cm
Working Temp : -30C~60C
Teflon Bushing, 15cm wire, coreless motor

Replacement gears 99 cents
http://www.unitedhobbies.com/unitedhobb ... oduct=4950



Just ordered
3x 9g servos
1x 5g servo
1x replacement gearset for 9g servo
1x replacement gearset for 5g servo

Shipping was only $3.06.. Total was $19 shipped for 4 servos+parts.
Two thumbs up in my book

That is a good deal. I'll be picking up some of those.

They also have this 18A brushless speed controller, for $9.99.
http://www.unitedhobbies.com/unitedhobb ... roduct=656
Would that be adequate for the size of brushless you'd use in a Micro-T? Like this one?
http://www.unitedhobbies.com/unitedhobb ... oduct=5229

... and Deans style connectors $6.55 for 10 pairs.
http://www.unitedhobbies.com/unitedhobb ... oduct=2116

that brushless esc would work, except it has no reverse like the mamba 25. For $9.99 tho..wow...just wow... who needs reverse?? hah
use now, buy mamba later.

Motor and deans are out of stock. good prices tho.

IMO better off getting the feigao 12x20mm motor. it's plenty of motor and
less current requirements. I havent kept up to date on the tiny lipos but
the 12x20 works great with a 2cell 250mah fullriver. if you can find the
300mah version then the 12x30 would give you some crazy tq for really
large custom pinions. motor requirements and lipo capabilities must
match up or it could cog/overdraw the lipo. I guess it kinda depends on
your chassis plate, if it can fit larger lipos, might be fun to try. A few
people on r7r have used the 12x30mm motors.

awesome awesome deals! i wonder id bishop power will hold to their pitch:
See a better price on a competitors web site? E-mail us! WE WILL BEAT ANY advertised price by 5% or more!

plus anyone know for sure if one of these servos is small enough to fit in a zzmt?

And a nano gyro! anyone for drifting something the size of an epoch or Micro T/Baja?
http://www.unitedhobbies.com/unitedhobb ... oduct=4320