Progress pictures of my shoddy work

Want to talk about micro boats or micro planes? How about trains, slot cars or submarines? Well you can do it all right here. If it's another hobby and it doesn't fit in one of our other forums, then it goes here.
Post Reply
honda_s2000
bitNinja
Posts: 883
Joined: Sat Oct 30, 2004 5:42 pm
Location: New Zealand

Progress pictures of my shoddy work

Post by honda_s2000 »

Hey guys,

Working on a little something here, so I thought I'd share some pictures.
I built the axle myself from some scraps I had lying around, seems to be true enough at this scale to work without problems.
Steering setup is working pretty well.
The chassis snapped on me and has been re-glued together, but I think I'll end up not using it anyway.

As you can see it's pretty scruffy, shouldn't look too bad once the axle is painted black.
Just waiting on some parts so I can get started on the driveline, should be much easier than the front axle.

I have some other electronics on the way, using an old 1/10 servo for the esc as the board is small, and I've got a FM TX/RX on the way too, but at the moment it's being controled by a board and battery from a micro heli.

Enough rambling, pictures time.

Image

Image

Image

Image

Image
We don't need no god damn roads!
sidewinder
bitProphet
Posts: 3165
Joined: Wed Apr 25, 2007 6:31 pm
Location: Walmart

Re: Progress pictures of my shoddy work

Post by sidewinder »

Hey someone's building stuff again! :-D Hey someone's building stuff again! :-D

Very cool project, looks like a good start to me. :-o
The smallest minority on earth is the individual. Those who deny individual rights cannot claim to be defenders of minorities. - Ayn Rand
frizzen
bitDisciple
Posts: 1730
Joined: Wed Aug 03, 2005 7:48 am
Location: Big Left Turn, Indiana
Contact:

Re: Progress pictures of my shoddy work

Post by frizzen »

Nice start on a TTTT!!!!!!

Is your drag link kinda long? I ask because the steering ackerman in the bottom view looks like it might be a bit much.

It's looking killer so far.
Jack of all trades, master of none; yet often better than master of one.
-
End genital mutilation, don't circumcise. Restore your fore'
honda_s2000
bitNinja
Posts: 883
Joined: Sat Oct 30, 2004 5:42 pm
Location: New Zealand

Re: Progress pictures of my shoddy work

Post by honda_s2000 »

Thanks guys,

Frizzen - thanks, and yea it's prob a bit long really. Didn't really notice that before. There's more detail on display in the photo in comparison to what my blurry eyes can see most of the time when I'm hacking away at 2am. :lol:

I have a question, which may not be answerable.

Since this is being controled by a micro heli board, one that charges from the controler. Plug it in, controller tells you when its done kinda scenario.... The charge lead on the controler won't seem to let it charge at the moment.
So, I was thinking about buying one of those USB charging leads for other micro heli's.
But I'm unsure as to whether the charging circuit is in the controler or in the heli board ?
I'm thinking it's most likely in the controler, as that's where the blinker comes on when it's finished charging normally.

Like I said it might not be answerable, as you can't see the controler, but I can take pictures if needed.
We don't need no god damn roads!
honda_s2000
bitNinja
Posts: 883
Joined: Sat Oct 30, 2004 5:42 pm
Location: New Zealand

Re: Progress pictures of my shoddy work

Post by honda_s2000 »

On another note,

I think I have a problem...

I just bought this

Image

umm, and this...

Image

and err..

Image

And.....

Image

oh dear... this one fell in there too....

Image

Won the whole lot off Trademe for $24 + $5 Shipping.
That's $23 USD to you guys, Which is a pretty good deal considering 3 of those are Herpa!
We don't need no god damn roads!
sidewinder
bitProphet
Posts: 3165
Joined: Wed Apr 25, 2007 6:31 pm
Location: Walmart

Re: Progress pictures of my shoddy work

Post by sidewinder »

You suck :razz:
The smallest minority on earth is the individual. Those who deny individual rights cannot claim to be defenders of minorities. - Ayn Rand
frizzen
bitDisciple
Posts: 1730
Joined: Wed Aug 03, 2005 7:48 am
Location: Big Left Turn, Indiana
Contact:

Re: Progress pictures of my shoddy work

Post by frizzen »

Jeez, you DO have a problem!

Bought all those trucks and you didn't buy any millitary rigs? :| Nice score
Jack of all trades, master of none; yet often better than master of one.
-
End genital mutilation, don't circumcise. Restore your fore'
User avatar
betty.k
bitPimp
Posts: 4090
Joined: Fri Dec 26, 2003 4:52 pm
Location: la la land
Contact:

Re: Progress pictures of my shoddy work

Post by betty.k »

oops, that reminds me. gotta send you that shit! :oops:
i used to be cool
Image
honda_s2000
bitNinja
Posts: 883
Joined: Sat Oct 30, 2004 5:42 pm
Location: New Zealand

Re: Progress pictures of my shoddy work

Post by honda_s2000 »

haha, no worries man. I'm not in a rush dude!
Plus you never let me know how much $$$$ you'd like.

:cool:
We don't need no god damn roads!
sidewinder
bitProphet
Posts: 3165
Joined: Wed Apr 25, 2007 6:31 pm
Location: Walmart

Re: Progress pictures of my shoddy work

Post by sidewinder »

honda_s2000 wrote:... you never let me know how much $$$$ you'd like.

:cool:
I'd like $500 usd...ah, what do I have to do for it? :sad:
The smallest minority on earth is the individual. Those who deny individual rights cannot claim to be defenders of minorities. - Ayn Rand
honda_s2000
bitNinja
Posts: 883
Joined: Sat Oct 30, 2004 5:42 pm
Location: New Zealand

Re: Progress pictures of my shoddy work

Post by honda_s2000 »

:screwed: hmm...

Hopefully BK won't want $500 US, mind you, Aussie wages are about 140% higher than NZ. :lol:
We don't need no god damn roads!
sidewinder
bitProphet
Posts: 3165
Joined: Wed Apr 25, 2007 6:31 pm
Location: Walmart

Re: Progress pictures of my shoddy work

Post by sidewinder »

At least you guys still have jobs...we seem to have decided to give ours to the Chinese. :sad:
The smallest minority on earth is the individual. Those who deny individual rights cannot claim to be defenders of minorities. - Ayn Rand
honda_s2000
bitNinja
Posts: 883
Joined: Sat Oct 30, 2004 5:42 pm
Location: New Zealand

Re: Progress pictures of my shoddy work

Post by honda_s2000 »

Mmm, yea. Tough times all over huh.

On a brighter note, did some work on the truck today. Didn't really make any progress but I figured some things out.

Firstly I figured out I'm actually an idiot. The micro heli board has no reverse, so driving a truck with no reverse is just pointless.
So, maybe I have a spare mini-z board somewhere I can use.

I bought a FM Transmitter, and micro receiver. Turns out I have no idea of the receiver band. Hoping it's 72mhz as that's what the TX is. Either way I have no chrystals for it.
so it looks like I might just pick up a cheap AM TX and X-tals and use the Mini-z Board as an all in one solution. This means, though. That I'm going to have to invest in a Li-Po charger, or try and get a cheap broken micro heli again, and convert the controller into a wall charger for my truck...

Hmm.. much pondering.
We don't need no god damn roads!
honda_s2000
bitNinja
Posts: 883
Joined: Sat Oct 30, 2004 5:42 pm
Location: New Zealand

Re: Progress pictures of my shoddy work

Post by honda_s2000 »

Well, had a little progress down here.

I added some springs and also produced a joint that lets it sway/rock.
In an earlier mockup you can see how it works, with no weight in the truck yet.

Image

So that's all well and good, but I still had the earlier issue of the frame snapping on me and the servo not really fitting all that well inside the rails in any case.

So I built a basic frame from some box styrene I had bought for axle parts.

Image

Image

I also added a few of the OG frames detail parts to the new frame

Image

Image

So here is a very shitty photo how it sits as of now :

Image

As this is somewhat of a experimental process, if I manage to pull this build off to get the truck functional I'm most definitely going to re-produce the frame and front axle from brass. Weight is great in this scale, heavy parts low down makes for some great scale driving.
We don't need no god damn roads!
frizzen
bitDisciple
Posts: 1730
Joined: Wed Aug 03, 2005 7:48 am
Location: Big Left Turn, Indiana
Contact:

Re: Progress pictures of my shoddy work

Post by frizzen »

Looking better all the time!
Jack of all trades, master of none; yet often better than master of one.
-
End genital mutilation, don't circumcise. Restore your fore'
Post Reply