Hmmmm, Iwaver board in SSMT?

viperdout · Post by **viperdout** » Mon Mar 28, 2005 5:00 pm

The only problem is that THERE'S NO POSITIVE POWER WIRE. Plans are for an HS55 (buying this weekend) and a 2s kokam 145 pack that's getting ordered tonight (fits like a glove). Anyway, anyone have a wiring diagram so I know where to solder the power wire on?

betty.k · Post by **betty.k** » Tue Mar 29, 2005 7:34 am

this pcb has had the fets removed, but the red wires going to the top right are +

viperdout · Post by **viperdout** » Tue Mar 29, 2005 1:49 pm

betty.k wrote:this pcb has had the fets removed, but the red wires going to the top right are +

Betty, does it also touch the exposed gold?

betty.k · Post by **betty.k** » Tue Mar 29, 2005 3:44 pm

if you mean the motor terminal with the black screw in it then no. the + solder tab on the pcb is pretty small. have a close look on yours and you will probably find a bit of broken wire on the pcb in that place.

viperdout · Post by **viperdout** » Tue Mar 29, 2005 4:42 pm

betty.k wrote:if you mean the motor terminal with the black screw in it then no. the + solder tab on the pcb is pretty small. have a close look on yours and you will probably find a bit of broken wire on the pcb in that place.

No, I mean the one directly to the left of it when the screws are pointed away from you

betty.k · Post by **betty.k** » Wed Mar 30, 2005 4:20 am

i have no idea what you mean now. but there's only 1 V+ solder tab on the pcb. don't bridge it to anything.

viperdout · Post by **viperdout** » Wed Mar 30, 2005 2:20 pm

betty.k wrote:i have no idea what you mean now. but there's only 1 V+ solder tab on the pcb. don't bridge it to anything.

Ah, I see why you don't. My circuit board looks different than that. Is it possible that the IW01 and 02 boards differ from the 04?

betty.k · Post by **betty.k** » Wed Mar 30, 2005 3:53 pm

there could be a difference. that's an old iw01 pcb i bought when they first hit about 9 months ago. came with the clear kt2 tx copy.

viperdout · Post by **viperdout** » Wed Mar 30, 2005 4:00 pm

betty.k wrote:there could be a difference. that's an old iw01 pcb i bought when they first hit about 9 months ago. came with the clear kt2 tx copy.

Well, I emailled Toy East and they're sending me a new one free. they are awesome. It's my first purchase there, and it won't be my last.

HirotoR34 · Post by **HirotoR34** » Wed Mar 30, 2005 4:54 pm

Agreed. I've ordered a bunch of stuff from them and they have always taken good care of me. It's good to see others out there that like TE.

crazydave · Post by **crazydave** » Thu Mar 31, 2005 7:38 am

HirotoR34 wrote:Agreed. I've ordered a bunch of stuff from them and they have always taken good care of me. It's good to see others out there that like TE.

I'll go ahead and 3rd that. TE has never done me wrong, and when I ordered my 04 nine days before Xmas, it got here in 7. I'm still boggled how stuff can get here from China faster than most of my domestic orders.

viperdout · Post by **viperdout** » Thu Mar 31, 2005 2:55 pm

crazydave wrote:
HirotoR34 wrote:Agreed. I've ordered a bunch of stuff from them and they have always taken good care of me. It's good to see others out there that like TE.
I'll go ahead and 3rd that. TE has never done me wrong, and when I ordered my 04 nine days before Xmas, it got here in 7. I'm still boggled how stuff can get here from China faster than most of my domestic orders.

LOL, same here. I was expecting 2 weeks for it to get here, and it took 1 week. TE has a new loyal buyer.