Xmods Evo Truck: Where's the spot for Tight Turn Mod?

Namuna · Post by **Namuna** » Thu Jul 13, 2006 9:00 pm

Okay, so I know the Tight Turn Mod is old, but the steps involve working on a car and not the trucks.

Can anyone tell me which wires I'd need to put the 3.3k Resistors on for this mod?

Here's a pic of the Evo Truck PCB:

Thanks!

Maxximum Attack · Post by **Maxximum Attack** » Fri Jul 14, 2006 5:16 am

There is no need to do that mod nammy, it's an EVO.

That mod was for the Gen1s when their steering REALLY sucked. The EVO steering is much better

Maxx

Namuna · Post by **Namuna** » Fri Jul 14, 2006 10:16 am

Maxximum Attack wrote:...The EVO steering is much better

Maxx

Well, I don't know about the Evo Cars, but my Hummer turning radius is pretty sad- compared to my Mini-Z Overland's turning radius. So if I could still do something with the resistors on the Hummer that would be great.

betty.k · Post by **betty.k** » Fri Jul 14, 2006 6:06 pm

i would agree with maxx, but if you gotta try it...

you know how there are 3 wires coming from a servo pot? and how the center one is "common"?

well the resistor mod involved putting the resistors inline with the 2 wires that aren't the common wire. that's it

Maxximum Attack · Post by **Maxximum Attack** » Sat Jul 15, 2006 10:16 am

Oh yeah, don't forget that you have on some really BIG shoes on that hummer, that will adversly affect handling but will increase the top speed slightly.