Xmod Fraud

arfin · Post by **arfin** » Tue Mar 01, 2005 4:26 pm

I love the random bs numbers they put up. LOL no chasis or batterys LMAO!!

wow kids are so easy to scam, i can't believe what some people will do to make some money. GET OFF YOUR ASS AND WORK DAMMIT.

LBRC · Post by **LBRC** » Tue Mar 01, 2005 10:56 pm

I like this one. Tell me again what body fits please? And wow I’d of never got them there FETs off right by my self, probably would have had to use an exacto knife and just cut the legs off or something.
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... eName=WDVW

arfin · Post by **arfin** » Wed Mar 02, 2005 5:43 pm

LOOL, i feel bad for anyone that bids on that. If i ever need to laugh i know what to look for. I have seen some crap go for SOOO much money, and it's almost always to new ebayers.

skylinekid · Post by **skylinekid** » Thu Mar 10, 2005 6:39 pm

I almost pissed myself as i read through this topic, fing stupid people!!!!!!!!!

LBRC · Post by **LBRC** » Fri Mar 18, 2005 3:15 pm

Been wondering what was behind this 30 volt, 9 amp FETs claim, but then I heard that they were the Vishay 4501’s (Vishay SI4501ADY data sheet) which made me laugh. Oh the P channel has a continuous drain current of 8.8 amps,

for a whole 10 seconds, and the N channel is rated at a whopping 8 volts, and 3.3 amps of continuous current

.

arfin · Post by **arfin** » Sat Mar 26, 2005 2:13 am

Doesnt this guy piss you off!

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... eName=WDVW
a damn motor for 102.50 and still going. Look what he calls it
"Biggest Fastest BRUTAL Big Block V-12 RedLine Dragster Propulsion PRO Motor".
WTF IS THAT ABOUT. LOL read his feedbacks his replies to them get me sooo angry. There its off my chest now!

viperdout · Post by **viperdout** » Sat Mar 26, 2005 10:16 am

arfin wrote:Doesnt this guy piss you off!
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... eName=WDVW
a damn motor for 102.50 and still going. Look what he calls it
"Biggest Fastest BRUTAL Big Block V-12 RedLine Dragster Propulsion PRO Motor".
WTF IS THAT ABOUT. LOL read his feedbacks his replies to them get me sooo angry. Their its off my chest now!

This is in a league for the OUTLAW or HardCore Xmod Racer

ROFL @ this quote!

Tuner1989 · Post by **Tuner1989** » Sat Mar 26, 2005 11:53 am

if you look at the bids all the bidders have kept their idenity secret i wouldnt doubt hes upping the bid himself

LBRC · Post by **LBRC** » Sat Mar 26, 2005 1:56 pm

What an interesting idea, you could bid with a couple of email addresses, then just mutually agree with yourself that there was a mistake and not sell, then realist the item at no charge. Wonder if you could still leave yourself feedback? Or you could sell it to yourself, eat the fee but write yourself a smashing beefback. Hidden bid to protect the bidders from what? Laughing or is the motor for a XXXmod. What type of motor comes in a powered marital aide? Would there be a market for lithium upgrades and “HOT” motors?

To be fair it would take hours to make a coustum wound 180 with ball bearings, I would start with a MegaFlight 18V for the commutator and magnets $14, Bearings $6, can with plastic endbell $5, $3 for high temp wire, epoxy, spacers and such. That’s $28 in parts plus about 4 hours labor, so the price would be about right for a hand wound epoxy balanced ball bearing 180? But I supose the auction would then say thats what it was, woulden't it? Edit: woops it's a 260, but I suppose bigger would be better in the XXXmod maritial aid.

backdrift · Post by **backdrift** » Sat Mar 26, 2005 2:41 pm

LBRC are you refering to this motor being a 180? If you are, its a 260 can and fits in with friction as you can see. If your not, ignore me!

LBRC · Post by **LBRC** » Sat Mar 26, 2005 2:52 pm

Wops 260, have to start with something different than the MegaFlight I was thinking of for the armature and magnets then. But shoot you could buy a really nice high speed 260 for under $20 bucks.

And after taking a closer look I would say if he hasn’t done anything then it’s your basic generic 260 found in the modeling section for about $5.

Why is the photo of the speed checker sitting on the edge of a bed with a fluffy red quilt?

backdrift · Post by **backdrift** » Sat Mar 26, 2005 4:30 pm

Haha, because hes 39 and lives in his parents basement, and sits around in wife beaters and his boxers eating chesse puffs.. Wait, i just summed up myself, kidding!

Those motors can be found at some sections, in the drawar's that are there. They are, i belive, 2.29 or something. But you can dewind it say, 25 turns and have a decently fast motor but it will severly over heat, since its a closed enbell and can. And isnt made for higher current app's.

cj · Post by cj » Sat Apr 16, 2005 7:30 am

my turn

I love the guys that sell Xmods stuff and don't even read what the package says. Thanks SG.

ex: AsiaTees

By the picture they are clearly the XM052.

Now they offer them in a set for the $15.99 and I sell them in pairs for $7.99 so for the set it would be $15.98. Since they are in Asia you have the high $5.00 S&H as well. I'm in the us and I charge $1.00 for every $19.99 spent if shipped in the US.

While I am on this rant lets add.

Dinnball China

Their shocks $7.90 a pair so 15.80 + S&h from China.

Atomic Mods USA

Their shocks $8.95 a pair so 17.90 + $5.50 S&h. $5.50 S&H? Come on a bubble envelope with two sets would cost at most $.60 .

Custom Xmods Parts USA

Their shocks $6.95 a pair so 13.90 + $4.00 S&h. $4.00 S&H? Come on a bubble envelope with two sets would cost at most $.60 .

Xmod World USA or is it Mini-Z World? Check out with paypal and it says Mini-Z World.

Their shocks $6.99 a pair so 13.98 + $5.00 S&h. $5.00 S&H? Come on a bubble envelope with two sets would cost at most $.60 .

BTW: I hope to have them back in stock soon.

Don't get me stated on other GPM parts unless you want to.

backdrift · Post by **backdrift** » Sat Apr 16, 2005 8:38 am

Owned..

cj · Post by cj » Sat Apr 16, 2005 10:30 am

backdrift wrote:Owned..

Don't get me started. BD you are not high on my list.