My reverse NO!!!!!!!!!!!!!

trekbikedude · Post by **trekbikedude** » Tue Nov 28, 2006 6:42 pm

The mosfets do not have any burnt marks or bubbles.

ph2t · Post by **ph2t** » Tue Nov 28, 2006 7:02 pm

then you may have fried the EP. replace that EP with a good, known working one. test it stock, OK. Then installthenelly on it and test again.

trekbikedude · Post by **trekbikedude** » Wed Nov 29, 2006 2:37 pm

If the EP is the electronics like the board in the car, I already tried that. I put a working one in there with stock fets then put the nelly in there. Trust me all the connections are good.

I also tried switching radios.

I just need a diagram of the nellys and which ones are forward/reverse.

ph2t · Post by **ph2t** » Wed Nov 29, 2006 2:52 pm

trek, did you buy the nelly off me or a re-seller? Send me the nelly and I'll fix it for you......

ph2t.

trekbikedude · Post by **trekbikedude** » Wed Nov 29, 2006 6:56 pm

I bought it from undergroundxmods. I do not know if that is directly from you though.

ph2t · Post by **ph2t** » Wed Nov 29, 2006 7:03 pm

yeah it is. If you want me to fix it let me know and I'll PM you my address. Please allow up to 4-6 weeks for turnaround since I'm in Aus.

bitPimps.lixlink.com

My reverse NO!!!!!!!!!!!!!

no the fets have no marks.

I already did that.

I bought it from...