Nelly Pro Turbo tester wanted....
Posted: Wed Jun 14, 2006 9:56 pm
I'm looking for someone to test my new Nelly Pro turbo. Nelly Pro includes some MOSFET driver circuitry that really improves the power to the motor.
AS you know my nelly evo turbo is a basic external h-bridge circuit. Nelly Pro includes some NEW mosfet drivers that are similar to the ones in my nelly deluxe turbo. The difference here is that it doesn't include the 5V regulator circuit.
Basically, I want to provide a turbo that can be pushed on the older gen1 XMODS but without the premium price tag that nelly deluxe commands.
Nelly EVO does work with Gen1's, with hot motors not a problem. Just with gen1's when you run them on lithiums, another below 30 odd turns MIGHT be an issue. This is due to the shortcommings of the gen1 PCB.
the retail price will be around $45,cheaper than Nelly deluxe, yet more expensive than nelly EVO.
I would like someone to test this nelly pro for me on a gen1 xmod since I don't have one anymore.
If you want to test it you MUST fullfill the following criteria:
-Purchase Nelly Pro for $25.
-Must have a gen1 xmod
-Must run a < 35 turn motor
-Must run Li-ions or lipoly (even better)
-Must be able to provide explicit feedback (nelly temp during tests, etc...)
If you can do this then I'm interested.....Let me know....If you burn up Nelly Pro in your testing I'll send you a new one. It's all part of the deal.
See here for pics and info about Nelly Pro:
http://www.ausmicro.com/forum/showthread.p...3868#post223868
cheers,
ph2t.
AS you know my nelly evo turbo is a basic external h-bridge circuit. Nelly Pro includes some NEW mosfet drivers that are similar to the ones in my nelly deluxe turbo. The difference here is that it doesn't include the 5V regulator circuit.
Basically, I want to provide a turbo that can be pushed on the older gen1 XMODS but without the premium price tag that nelly deluxe commands.
Nelly EVO does work with Gen1's, with hot motors not a problem. Just with gen1's when you run them on lithiums, another below 30 odd turns MIGHT be an issue. This is due to the shortcommings of the gen1 PCB.
the retail price will be around $45,cheaper than Nelly deluxe, yet more expensive than nelly EVO.
I would like someone to test this nelly pro for me on a gen1 xmod since I don't have one anymore.
If you want to test it you MUST fullfill the following criteria:
-Purchase Nelly Pro for $25.
-Must have a gen1 xmod
-Must run a < 35 turn motor
-Must run Li-ions or lipoly (even better)
-Must be able to provide explicit feedback (nelly temp during tests, etc...)
If you can do this then I'm interested.....Let me know....If you burn up Nelly Pro in your testing I'll send you a new one. It's all part of the deal.
See here for pics and info about Nelly Pro:
http://www.ausmicro.com/forum/showthread.p...3868#post223868
cheers,
ph2t.