AWD?
-
- bitThug
- Posts: 66
- Joined: Tue Aug 22, 2006 8:28 pm
AWD?
Ok I just installed All wheel drive on my evo with the gpm middle gear thing (it's shaped like a cone.) I also have alloy diffs from gpm. Lately, The AWD Seems to be slipping (when I hold the front wheels the back wheels spin) I can't figure out what is causing this.
Please help or tell me a fix,
John
Thanks
Please help or tell me a fix,
John
Thanks
- Clint
- bitPimp
- Posts: 519
- Joined: Sun Jul 06, 2003 7:20 am
- Location: Albany, NY
- Contact:
-
- bitThug
- Posts: 66
- Joined: Tue Aug 22, 2006 8:28 pm
- Clint
- bitPimp
- Posts: 519
- Joined: Sun Jul 06, 2003 7:20 am
- Location: Albany, NY
- Contact:
Ah, You might need a slightly longer driveshaft due to GPM manufacturing intolerances. You can file down a larger evo driveshaft down to size(if you aren't already using the long one). Or get a carbon fiber rod and cut it to
fit.
Midwest sells carbon fiber rods cheap. I use them all the time.
(local hobby shop carries the brand) I'd have to look up the proper
diameter. (dont recall it offhand).
http://www.midwestproducts.com
fit.
Midwest sells carbon fiber rods cheap. I use them all the time.
(local hobby shop carries the brand) I'd have to look up the proper
diameter. (dont recall it offhand).
http://www.midwestproducts.com
-
- Posts: 9
- Joined: Tue Oct 03, 2006 10:52 am
yo what u have to do is shim the "3rd gear" as people are calling it
This one
http://www.atomicmods.com/ProductInfo.a ... ctid=12348
u have to put a shim on the right hand side, and on this on witch is the front u have to put a shim on the left hand side http://www.atomicmods.com/ProductInfo.a ... ctid=12347
, what u are trying to acomplish with doing this is making the gears have a tighter fit so they dont slip what i used when i did this was 2 pieces of paper for 1 shim. if im not making my self clear then email me at harr4340@gmail.com and i can take pics for u
This one
http://www.atomicmods.com/ProductInfo.a ... ctid=12348
u have to put a shim on the right hand side, and on this on witch is the front u have to put a shim on the left hand side http://www.atomicmods.com/ProductInfo.a ... ctid=12347
, what u are trying to acomplish with doing this is making the gears have a tighter fit so they dont slip what i used when i did this was 2 pieces of paper for 1 shim. if im not making my self clear then email me at harr4340@gmail.com and i can take pics for u
-
- bitThug
- Posts: 66
- Joined: Tue Aug 22, 2006 8:28 pm
It's Not a truck
It's not a truck.