atomic chili evolution motor
Posted: Sun Apr 26, 2009 11:23 pm
i was at my local track/shop the other day and saw the new atomic evo motors. i don't need another one but i had to have it!
http://www.atomicmods.com/Products/Atom ... 13510.aspx" target="_blank
the most striking feature is the 1:10 style endbell. and it's well built with good tolerances.
it has bb's, neo's and a 35 turn armature. same specs as my pn so4 but there is a noticable difference in the chassis!
i installed it in my chassis with an 8t pinion and it clocks 37kph on my tamiya checker! with my so4 i had to use a 9t pinion to get that speed.
and it'll run cool, first thing i noticed once installed was the amount of air it threw off, the ventilated can really does a great job.
i'm yet to try it on the track yet but i'm expecting it to be a handful!
http://www.atomicmods.com/Products/Atom ... 13510.aspx" target="_blank
the most striking feature is the 1:10 style endbell. and it's well built with good tolerances.
it has bb's, neo's and a 35 turn armature. same specs as my pn so4 but there is a noticable difference in the chassis!
i installed it in my chassis with an 8t pinion and it clocks 37kph on my tamiya checker! with my so4 i had to use a 9t pinion to get that speed.
and it'll run cool, first thing i noticed once installed was the amount of air it threw off, the ventilated can really does a great job.
i'm yet to try it on the track yet but i'm expecting it to be a handful!