mr-02 diff knowledge

General discussions, tutorials, help, upgrades, and new info about the Mini-Z / I-Waver line of RCs goes here.
User avatar
LBRC
bitGangsta'
Posts: 361
Joined: Sun May 02, 2004 1:25 am
Location: North West
Contact:

Post by LBRC »

The bottom row of parts are laid out in the order they go back on the axle.
Image

Something I posted at Nanospeed awhile back, post #2 talks about adjusting the differential:
http://server08.ipslink.com/~nanospee/f ... #entry1559
User avatar
MafiaS
bitGangsta'
Posts: 322
Joined: Fri Sep 30, 2005 4:43 pm
Location: Ontario, Canada

Post by MafiaS »

BEAUTY! Thank you very much, that should do the trick...
User avatar
dogbreathracing
bitPlaya'
Posts: 101
Joined: Fri Apr 28, 2006 6:46 am
Location: Portland Or Area

Post by dogbreathracing »

HACHI-RYOKU wrote:Here's a some picks outlining the generals. Your ball diff should look very similar.

Image
Image
Image
Image

The extra little washers are mostly used for spacing on the wheels. You can put them on either end to do small adjustments. You should at least put one on the gear side of the axle. Also, in my picks you may notice that I used screw tightener to hold the half-screw in place in the last pick. I recomend this as those things like to come loose and you'll get those symptoms that you were describing.

These pictures were taken in reverse order as I was taking it all apart to clean it.

Also, this may be redundant, but don't forget to tighten the adjustment. If it's too loose you'll get these same symptoms.

Hope this helps.
Nice Diff!!! Does it come stock with the Hairball or was that extra?....LOL
R/C Crash Test Dummy
Image
payaso
bitPimp
Posts: 4293
Joined: Mon Dec 16, 2002 1:10 pm
Location: on vacation in Vaporville
Contact:

Post by payaso »

Those hairs are infact titanium, and are not stock. They are the PN Ti super hairs. :-D



Welcome DBR.


silla :D
payaso...... :)

"Imagination is everything. It's the preview to lifes coming attractions" -Albert Einstein
User avatar
dogbreathracing
bitPlaya'
Posts: 101
Joined: Fri Apr 28, 2006 6:46 am
Location: Portland Or Area

Post by dogbreathracing »

Image

Where do I get some?!?!?!?
Looks like a "got to have" custom part
R/C Crash Test Dummy
Image
Post Reply