MZM lifted fet pad HELP
Posted: Sun Mar 05, 2006 2:39 pm
Ok so I burned my fets AGAIN, this time it was a 4x2 stack. One of the output side fet pads came off, will this matter. Since the output voltage is common to all the pins?
bitPimps.lixlink.com
Custom Modifications
https://bitpimps.lixlink.com/pages/phpForum/
MZM lifted fet pad HELP
https://bitpimps.lixlink.com/pages/phpForum/viewtopic.php?f=44&t=7555
Page 1 of 1
Posted: Mon Mar 06, 2006 2:21 am
provided it's definately one of the drain pins then you should be fine
Posted: Mon Mar 06, 2006 2:42 pm
Thanks Betty, it is one of the drain pins, but this being the second stack I have fried(never fried one on another car) I am just gonna put a nelly in it.