Super Bit vs. Std Bit body height

noxorc · Post by **noxorc** » Thu Aug 07, 2003 9:50 pm

In the first picture, you can see the chassis on the right is higher off the ground.
But also notice the height of the tires are also taller.
The new Super Bit is on the leftside. The tires are low profile. As is the chassis.

Now, after removing the tires....Still a height difference.

-Nox

Yagbols · Post by **Yagbols** » Thu Aug 07, 2003 10:02 pm

tires look wider too? do the front rims of the super bit have the same diameter as the back rims nox?

SilentWolv · Post by **SilentWolv** » Thu Aug 07, 2003 10:06 pm

The chassis still looks the same. The wheels are taller?

noxorc · Post by **noxorc** » Thu Aug 07, 2003 10:08 pm

Yagbols wrote:tires look wider too? do the front rims of the super bit have the same diameter as the back rims nox?

Yes...and that is different from the std. bits.

I did a non-scientific measurement (by eye).

anyone else with a superbit can confirm, please.

But, yea... take your Std. bits front rims and put them on the back.
help to lower your rear end.

-nox

sessiz · Post by **sessiz** » Thu Aug 07, 2003 10:38 pm

I can confirm that the rear wheels are the same size as the fronts.

CheeseWarfare · Post by **CheeseWarfare** » Fri Aug 08, 2003 8:41 am

You mean Super-bits have Full-size wheels stock? Kool!

PseudoRooter · Post by **PseudoRooter** » Fri Aug 08, 2003 3:13 pm

Actually the super bit rims with tires are the same height as pull-backs with tires. Just not as wide.

hogjowlz · Post by **hogjowlz** » Fri Aug 08, 2003 3:20 pm

for those of you who dont have a super bit yet: go buy one

TheEvo · Post by **TheEvo** » Tue Sep 02, 2003 2:47 pm

How 'bout us who cant get them?
To the point.. Are they that good?
I also wanna ask if the pull back chassis fits stock bit chassis.. just ordered 2 pullbacks, countach and GT2.. soo.. they should do?

/Evo

hogjowlz · Post by **hogjowlz** » Tue Sep 02, 2003 2:55 pm

super bits = super

pullback bodies fit on bits no problem