Page 2 of 2
Posted: Tue Dec 09, 2003 7:34 am
by MBLP
I am having a real hard time getting the backwheels to fit the axle
I have tried The Payaso Solution with blunt paper but it do not seem to work for me. Any other solution???? Please help me............
Posted: Tue Dec 09, 2003 8:25 am
by CaboWabo
you can try using some sort of epoxy.
all you need to do is get something either around the axle or in the hole of the rim where the axle fits to make it snug.
make sure you roll the wheels a few times to make sure they're even and straight
Posted: Wed Dec 10, 2003 3:45 am
by MBLP
Thanxxx Player
I`ll soon be rolling on dub$$$, thanks to your most exelent guide!!!
Posted: Wed Dec 10, 2003 7:56 am
by CaboWabo
no problem pimp, good luck - the pullbacks are the schizzle
Posted: Thu Jan 22, 2004 3:43 pm
by Cheesehead
Inquiring minds want to know:
How the @#$@# do you remove the pins from the ZZSE wheels so I can put on a set of these? The wheels you have on there should get a big increase in traction and top speed from the increased diameter.
That looks great...methinks I will make this mod.
Posted: Thu Jan 22, 2004 4:03 pm
by CaboWabo
you're gonna have to find what works best for you.
the most common methods are:
- use needle nose pliers to pull the pin out. (some heat up the pin a tad with a soldering iron - others dont)
- use small flat head micro screw drivers and pry the pin out.
- cut the rim right off the pin and then pull the pin out.
I prefer using the needle nose pliers method.
good luck pimp, it's well worth it.
Posted: Wed Feb 16, 2005 9:23 pm
by HirotoR34
Just did my second pullback mod on my Jota. Got the nice 5 spoke pullback rims (awwyeah). Painted them gold, and now I just got to find a color for the shell. One of my all time favorite mods. Gotta hand it to C-dub, the man's an origional.
Posted: Thu Feb 17, 2005 3:29 pm
by CaboWabo
Glad it's still helpin pimps out there.
You guys already know I swear by pullback wheels.
Just get em.
Posted: Thu Feb 17, 2005 7:16 pm
by HirotoR34
It's funny, I did my first pb wheel mod on a trueno bit I made into an initialD clone. That was almost a year ago, so's I had to come back fo the refresha course.
Posted: Fri Feb 18, 2005 1:26 am
by sg219
CaboWabo wrote:Glad it's still helpin pimps out there.
You guys already know I swear by pullback wheels.
Just get em.
I'm waiting on a professional install to be able to swear by them.
Posted: Fri Feb 18, 2005 8:16 am
by CaboWabo
Dude, you gotta write the BBB about that guy.
He must be making the super glue using the old family recipe or somethin' lol
Posted: Fri Feb 18, 2005 11:55 am
by HirotoR34
Well, whatever. I swear by em too. Crazy traction and turning can be had if the mod is done right. And C-dubs easy as pie tut does the trick.