Page 1 of 1
pull back wheel mod
Posted: Wed Sep 10, 2003 3:37 am
by brendan123
i recently done the pull back wheel mod but when i put it on the ground and press go it just goes around in circles i have checked the steering and nothen wrong with that and sugestions???
Posted: Wed Sep 10, 2003 7:12 am
by VooDooMafia
could be loose rim on the back? or tight rim on the front
Posted: Wed Sep 10, 2003 9:32 am
by hogjowlz
i had that problem and it was the front rim rubbing. could also be the rear so what he said.
Posted: Wed Sep 10, 2003 1:35 pm
by payaso
It's probably one of the front tires rubbing when the car sits.. Try flipping the tire around on the rim...
silla
Posted: Thu Sep 11, 2003 6:27 am
by brendan123
the wheel is no were near hitting but it still does it
Posted: Sat Sep 13, 2003 8:39 am
by eman
does it hit when it turns?
your rear axle might be too tight so the right wheel is rubbing on the chassis
Posted: Sat Sep 13, 2003 8:47 am
by TheEvo
A lose rear wheel doesn't make the ´car go in circles, on mine though. Loosen rear wheel will only make the slower and turn left or right
/Evo
Posted: Sat Sep 13, 2003 11:42 am
by hogjowlz
on a single cell = a loose rear makes your car bank to the right usually since the right wheel is most likely to be loose.
on a dual cell = a loose rear makes your car bank hard to the right
brendan: do both front wheels freely spin?
Posted: Sat Sep 13, 2003 7:21 pm
by brendan123
yes the frot wheels spin good ive checked heaps of times
Posted: Sat Sep 13, 2003 7:27 pm
by VooDooMafia
did you fill the holes in the rims were the pin goes then redrill(seeing as the hole is much larger then the normal rims hole).
Posted: Sat Sep 13, 2003 9:08 pm
by eman
VooDooMafia wrote:did you fill the holes in the rims were the pin goes then redrill(seeing as the hole is much larger then the normal rims hole).
or use some kind of spacer like paper inbetween the rear rim and axle.