Alloy rims and tires
-
- bitPimp
- Posts: 4293
- Joined: Mon Dec 16, 2002 1:10 pm
- Location: on vacation in Vaporville
- Contact:
Alloy rims and tires
I've read in other threads in other forums about these alloy bit rims from the German site, and about how nice they are, and about how much they improve handling, and this, that, and the other thing, and for pros only, and blah blah blah......
I was lucky enough to aquire a couple sets of these rims and tires through a friend of mine in Germany, and they are this, that, and the other thing, and a bag of chips. I guess they have re-designed them to be easier to install, because there's no more drilling involved.

The tools required for this job are: X-acto knife, superglue, wire cutters, and a phone book.
The parts required for this job are: Metal stock from your local hobby shop, and small nails.
Start by taking your back wheels off your chassis. Next you want to pull the plastic wheels off the axle. The only thing you'll be using from them is the gear, so be careful removing it off the axle.
After you get the gear off, you can start the assembly process. You will need to cut a new axle for this mod. The one originally on the bit is too long and fat because of the nubs that hold the plastic wheel on. Cut your new axle to exactly 1 inch, put the gear on, and push the wheels on to see where they need to be glued. They should be snug to the chassis, but not too snug. Very little play. After you do this, glue the rims in place with the gear in the middle. When the glue is dry, slide the gear to the left side and glue it in place. It's that easy...

When installing the metal hubs, (if you plan on painting them leave them in their holder) simply snip them out of the holder, take a toothpick with very little glue on it and dab the inside of the rim where the hub rests. If you need to use something to push the hub down in, you can use an eraser (new one) on the end of a pencil.
For the front wheels, all you need are the steering knuckles. This is where the phone book comes in handy. Drill a small hole in the middle of the book just a little bigger than the pin in the wheel. This is for removing the pins. Turn the wheel over to where the pin is over the hole. Take a piece of stock and push the pin out from the opposite side. Be careful when doing this so you don't ruin your knuckles.
The small nails fit perfectly through the holes in the rims, so these will be the new pins. Cut them to the length you want and put a dab of glue on the back side of the knuckles to hold them in place and Ta Dow, How ya like me now? My sled is cherried out...

Some bodies work better than others with this mod, so if you're having trouble steering with the body on, try trimming a little bit of the wheel wells out with the X-acto blade just enough till they clear it.
silla
I was lucky enough to aquire a couple sets of these rims and tires through a friend of mine in Germany, and they are this, that, and the other thing, and a bag of chips. I guess they have re-designed them to be easier to install, because there's no more drilling involved.


The tools required for this job are: X-acto knife, superglue, wire cutters, and a phone book.
The parts required for this job are: Metal stock from your local hobby shop, and small nails.
Start by taking your back wheels off your chassis. Next you want to pull the plastic wheels off the axle. The only thing you'll be using from them is the gear, so be careful removing it off the axle.
After you get the gear off, you can start the assembly process. You will need to cut a new axle for this mod. The one originally on the bit is too long and fat because of the nubs that hold the plastic wheel on. Cut your new axle to exactly 1 inch, put the gear on, and push the wheels on to see where they need to be glued. They should be snug to the chassis, but not too snug. Very little play. After you do this, glue the rims in place with the gear in the middle. When the glue is dry, slide the gear to the left side and glue it in place. It's that easy...


When installing the metal hubs, (if you plan on painting them leave them in their holder) simply snip them out of the holder, take a toothpick with very little glue on it and dab the inside of the rim where the hub rests. If you need to use something to push the hub down in, you can use an eraser (new one) on the end of a pencil.
For the front wheels, all you need are the steering knuckles. This is where the phone book comes in handy. Drill a small hole in the middle of the book just a little bigger than the pin in the wheel. This is for removing the pins. Turn the wheel over to where the pin is over the hole. Take a piece of stock and push the pin out from the opposite side. Be careful when doing this so you don't ruin your knuckles.
The small nails fit perfectly through the holes in the rims, so these will be the new pins. Cut them to the length you want and put a dab of glue on the back side of the knuckles to hold them in place and Ta Dow, How ya like me now? My sled is cherried out...

Some bodies work better than others with this mod, so if you're having trouble steering with the body on, try trimming a little bit of the wheel wells out with the X-acto blade just enough till they clear it.
silla
payaso...... 
"Imagination is everything. It's the preview to lifes coming attractions" -Albert Einstein

"Imagination is everything. It's the preview to lifes coming attractions" -Albert Einstein
- kwikbb
- bitPimp
- Posts: 1310
- Joined: Tue Feb 04, 2003 2:50 pm
- Location: East Coast Reprezent'n
- Contact:
-
- bitPimp
- Posts: 4293
- Joined: Mon Dec 16, 2002 1:10 pm
- Location: on vacation in Vaporville
- Contact:
It's crystal clear that so many people want these rims... I can't believe they're still this hard to get..
You know when you can get some powdered black rhino horn easier than a part for a little rc car somethin's whacked out...lol
Thanks for the props kwik.
silla
You know when you can get some powdered black rhino horn easier than a part for a little rc car somethin's whacked out...lol
Thanks for the props kwik.
silla
payaso...... 
"Imagination is everything. It's the preview to lifes coming attractions" -Albert Einstein

"Imagination is everything. It's the preview to lifes coming attractions" -Albert Einstein
-
- bitPimp
- Posts: 4293
- Joined: Mon Dec 16, 2002 1:10 pm
- Location: on vacation in Vaporville
- Contact:
-
- bitPimp
- Posts: 4293
- Joined: Mon Dec 16, 2002 1:10 pm
- Location: on vacation in Vaporville
- Contact:
Sweet... I'm doing another one in black with a silver grille and highlights. The rims are gonna look outta sight on this jobby job..Shypo wrote:Payaso:
white gloria with tinted windows and golden grill![]()
silla
payaso...... 
"Imagination is everything. It's the preview to lifes coming attractions" -Albert Einstein

"Imagination is everything. It's the preview to lifes coming attractions" -Albert Einstein
-
- bitPimp
- Posts: 4293
- Joined: Mon Dec 16, 2002 1:10 pm
- Location: on vacation in Vaporville
- Contact:
I'm gonna buy a calling card to call my friend over there and see if she can hook a brotha up.. I should know something by Tues. I'll keep you guys informed.MythosGR wrote:great job payaso...
Do you think that you could find another set of rims?
I leave in greece so shipment from Germany to Greece should be close to nothing...Do you think that you can help in that?
Plz...
silla
payaso...... 
"Imagination is everything. It's the preview to lifes coming attractions" -Albert Einstein

"Imagination is everything. It's the preview to lifes coming attractions" -Albert Einstein
- kwikbb
- bitPimp
- Posts: 1310
- Joined: Tue Feb 04, 2003 2:50 pm
- Location: East Coast Reprezent'n
- Contact:
You da man! Yo the though of 'flossin dem dubs'... mmm makin me all tingly an $hit.payaso wrote:I'm gonna buy a calling card to call my friend over there and see if she can hook a brotha up.. I should know something by Tues. I'll keep you guys informed.MythosGR wrote:great job payaso...
Do you think that you could find another set of rims?
I leave in greece so shipment from Germany to Greece should be close to nothing...Do you think that you can help in that?
Plz...
silla


-
- bitPimp
- Posts: 4293
- Joined: Mon Dec 16, 2002 1:10 pm
- Location: on vacation in Vaporville
- Contact:
I have a set of the BBS 4 LOCH rims like you and I just finished em, so I'll put the pics up tonight... Shits pimp..Shypo wrote:man i'd kill fo another set of dem rims, i love mine sooo much. they make my car look sooooo sweet
silla
payaso...... 
"Imagination is everything. It's the preview to lifes coming attractions" -Albert Einstein

"Imagination is everything. It's the preview to lifes coming attractions" -Albert Einstein
- kwikbb
- bitPimp
- Posts: 1310
- Joined: Tue Feb 04, 2003 2:50 pm
- Location: East Coast Reprezent'n
- Contact: