A bit of borin safety for noobs
-
- bitHood
- Posts: 37
- Joined: Tue Apr 04, 2006 5:40 am
- Location: Australia
A bit of borin safety for noobs
Cuttin:
exacto knives, surgical blades and dremmels hurt! dont use dremmels near loose clothing as they love to grab, tear and mame. Male sur not to cut towards yourself, and clinch a cable tie round your exacto knife to stop it rollin off the table and into your leg.
Gluin:
Take it from me, ive had super glue in my eyes b4, and it hurts a lot. So try and wear glasses. A lot of model glues also burn, sting etc on contact so gloves and goggles help. Try not to get the glue fumes in your eyes, and a lot of ingredients in glues (cyanacroalite etc.) are very poisonous and can harm you on contact with skin.
Paintin:
Acrylic(water based paints are usually okay, but many people use spray cans or even airbrushes. The paint in spray cans and similar is enamel, which isnt so good for you, and the gas from the can is even worse. So a dust mask would work welll here, and goggles if you like your eyes. Enamel paint is very hard to remove, and ive still got black paint on me from a week ago. If you think theres a enamel paint remover, there is, its mineral turps. Lets see: its poisonous, flammable, harms your eyes, melts the plastic in bit bodies and loves to get into your blood stream and play with your heart and brain. So dont use mineral turps!
exacto knives, surgical blades and dremmels hurt! dont use dremmels near loose clothing as they love to grab, tear and mame. Male sur not to cut towards yourself, and clinch a cable tie round your exacto knife to stop it rollin off the table and into your leg.

Gluin:
Take it from me, ive had super glue in my eyes b4, and it hurts a lot. So try and wear glasses. A lot of model glues also burn, sting etc on contact so gloves and goggles help. Try not to get the glue fumes in your eyes, and a lot of ingredients in glues (cyanacroalite etc.) are very poisonous and can harm you on contact with skin.
Paintin:
Acrylic(water based paints are usually okay, but many people use spray cans or even airbrushes. The paint in spray cans and similar is enamel, which isnt so good for you, and the gas from the can is even worse. So a dust mask would work welll here, and goggles if you like your eyes. Enamel paint is very hard to remove, and ive still got black paint on me from a week ago. If you think theres a enamel paint remover, there is, its mineral turps. Lets see: its poisonous, flammable, harms your eyes, melts the plastic in bit bodies and loves to get into your blood stream and play with your heart and brain. So dont use mineral turps!
MiNiBiTgUy
1.1 WRX bit-charg- retired(but still works)
4.2 BB open back
4.2 mercedes imitation
3.8 toyota corolla- deceased
4.2 custom convertible WRX
1.1 WRX bit-charg- retired(but still works)
4.2 BB open back
4.2 mercedes imitation
3.8 toyota corolla- deceased
4.2 custom convertible WRX
- crazydave
- bitPimp
- Posts: 6874
- Joined: Thu Apr 17, 2003 9:05 am
- Location: Koolsville
Ummm, yeah, ok.... I think you had good intentions....
See, that's some pretty common sense stuff. That's pretty much what bitPimps is about, kind of a hide away from people who lack in common sense.
BTW, I highly reccomend Duplicolor automotive laquers for paintin'. Just make sure you point the nozzle at the car, and not your eye. Oh and you shouldn't inhale the fumes, unless you're intending to and got a few brain cells to spare.

See, that's some pretty common sense stuff. That's pretty much what bitPimps is about, kind of a hide away from people who lack in common sense.
BTW, I highly reccomend Duplicolor automotive laquers for paintin'. Just make sure you point the nozzle at the car, and not your eye. Oh and you shouldn't inhale the fumes, unless you're intending to and got a few brain cells to spare.

-
- bitDisciple
- Posts: 1462
- Joined: Wed Oct 05, 2005 10:35 am
- Location: On the trail
- Contact:
-
- bitHood
- Posts: 37
- Joined: Tue Apr 04, 2006 5:40 am
- Location: Australia
-
- bitNinja
- Posts: 883
- Joined: Sat Oct 30, 2004 5:42 pm
- Location: New Zealand
- stagg
- bitGangsta'
- Posts: 422
- Joined: Mon Jul 19, 2004 5:09 pm
I think we got to Shaun a little late.honda_s2000 wrote:If you learn to spell , expect people to reply.SHAUN wrote:If you paint in a sealed nuculer(sp) bomb shelter that is not ventalated(SP) ,don't inhale the fumes.
![]()
![]()
Oh shit !you shouldn't inhale the fumes

Yea, most of this stuff is commn sense like Dave said. The only thing I can think of that I have done is Solder'd in a unventalated area, and grabbed the wrong end once.

- steelwoolghandi
- bitPimp
- Posts: 1696
- Joined: Fri Jun 11, 2004 11:53 am
- Location: RIGHT BEHIND YOU!!
- Contact:
- betty.k
- bitPimp
- Posts: 4090
- Joined: Fri Dec 26, 2003 4:52 pm
- Location: la la land
- Contact:
- Clint
- bitPimp
- Posts: 519
- Joined: Sun Jul 06, 2003 7:20 am
- Location: Albany, NY
- Contact:
-
- bitPimp
- Posts: 4244
- Joined: Thu Jan 22, 2004 1:00 pm
- Location: Kennywood, PA
- Contact:
-
- bitPimp
- Posts: 4244
- Joined: Thu Jan 22, 2004 1:00 pm
- Location: Kennywood, PA
- Contact:
-
- bitNinja
- Posts: 883
- Joined: Sat Oct 30, 2004 5:42 pm
- Location: New Zealand
Dont ride your bike into a parked car , because your looking at the woman across the street (This had to be one of the most embarresing yet funny things ever happen to me)
Oh Shaun , A good thing to correct your grammar , would be to go tie yourself to the railway track with handcuffs , and swallow the key
I mean C'mon , You cant even spell your own name properly , Unless on your birth certificate its in caps lock like "SHAUN" , you should spell it with not 5 , not 3 , not 2 , but just ONE capital letter , like so : Shaun.
Is it really that hard ?

Oh Shaun , A good thing to correct your grammar , would be to go tie yourself to the railway track with handcuffs , and swallow the key

I mean C'mon , You cant even spell your own name properly , Unless on your birth certificate its in caps lock like "SHAUN" , you should spell it with not 5 , not 3 , not 2 , but just ONE capital letter , like so : Shaun.
Is it really that hard ?

We don't need no god damn roads!
- sat4life27
- bitPimp
- Posts: 404
- Joined: Wed Apr 27, 2005 10:48 am
- Location: Warner Vegas, GA
LOL he's kinda like Cantgetright. I blame his parents, that is what happens when you get to many hugs.honda_s2000 wrote:Dont ride your bike into a parked car , because your looking at the woman across the street (This had to be one of the most embarresing yet funny things ever happen to me)![]()
Oh Shaun , A good thing to correct your grammar , would be to go tie yourself to the railway track with handcuffs , and swallow the key
I mean C'mon , You cant even spell your own name properly , Unless on your birth certificate its in caps lock like "SHAUN" , you should spell it with not 5 , not 3 , not 2 , but just ONE capital letter , like so : Shaun.
Is it really that hard ?
-
- bitNinja
- Posts: 883
- Joined: Sat Oct 30, 2004 5:42 pm
- Location: New Zealand