OEM Bullets
-
payaso
- bitPimp
- Posts: 4293
- Joined: Mon Dec 16, 2002 1:10 pm
- Location: on vacation in Vaporville
- Contact:
-
CaboWabo
- Site Admin
- Posts: 10259
- Joined: Tue Dec 10, 2002 4:05 pm
- Location: The Adult Table
- Contact:
-
CaboWabo
- Site Admin
- Posts: 10259
- Joined: Tue Dec 10, 2002 4:05 pm
- Location: The Adult Table
- Contact:
Still trying to make this POS useful, I decided the easiest way was to use some of those batteries I got from Namuna and dual cell it - I did.
Leaving everything else the same - it was basically just a dual celled POS still.
Moved to my next thought. The gear on the motor itself is huge (see page 1 - kinda), and putting the normal black gear wouldn't touch to the other gear. I decided to hack at the chassis to allow room for the motor to scoot forward - and used the tabs from the batts, wrapped in electrical tape, to push the motor forward and off the rear casing. I could now put in my motors with the normal black gear. It's still basically just a dual celled POS.
The only left that could be holding this thing back is the pcb, I'm not going to transfer a pcb off a good car to shit car just so I can say the POS is somewhat useful.
Did I mention I hate this OEM Thunderbold Bullet Crapper Benzo, from chassis to the body - it's a POS.
Leaving everything else the same - it was basically just a dual celled POS still.
Moved to my next thought. The gear on the motor itself is huge (see page 1 - kinda), and putting the normal black gear wouldn't touch to the other gear. I decided to hack at the chassis to allow room for the motor to scoot forward - and used the tabs from the batts, wrapped in electrical tape, to push the motor forward and off the rear casing. I could now put in my motors with the normal black gear. It's still basically just a dual celled POS.
The only left that could be holding this thing back is the pcb, I'm not going to transfer a pcb off a good car to shit car just so I can say the POS is somewhat useful.
Did I mention I hate this OEM Thunderbold Bullet Crapper Benzo, from chassis to the body - it's a POS.
Dear Life Cereal, Where do you get off? Part of a balanced breakfast and delicious? Who do you think you are? By now you may have guessed I'm speaking ironically and have nothing but good things to say about what you do. Life cereal do not change a thing.
-
karl-2k3
- Posts: 9
- Joined: Thu May 22, 2003 1:55 pm
- Location: Merseyside
- Contact:
-
CaboWabo
- Site Admin
- Posts: 10259
- Joined: Tue Dec 10, 2002 4:05 pm
- Location: The Adult Table
- Contact:
welcome to da crib karl-2k3... gonna dual cell with those clone batts?
Dear Life Cereal, Where do you get off? Part of a balanced breakfast and delicious? Who do you think you are? By now you may have guessed I'm speaking ironically and have nothing but good things to say about what you do. Life cereal do not change a thing.
-
ph2t
- bitPimp
- Posts: 1979
- Joined: Tue Mar 25, 2003 6:33 am
- Location: taco city
-
karl-2k3
- Posts: 9
- Joined: Thu May 22, 2003 1:55 pm
- Location: Merseyside
- Contact:
-
CaboWabo
- Site Admin
- Posts: 10259
- Joined: Tue Dec 10, 2002 4:05 pm
- Location: The Adult Table
- Contact:
you're not using those white bullet gears are you?
if not, you should definetaly see a major increase in torque and speed if your dual cell is working right.
if not, you should definetaly see a major increase in torque and speed if your dual cell is working right.
Dear Life Cereal, Where do you get off? Part of a balanced breakfast and delicious? Who do you think you are? By now you may have guessed I'm speaking ironically and have nothing but good things to say about what you do. Life cereal do not change a thing.