bitPimps.lixlink.com

i under stand that the problem with the sway bars is that one wheel goes up..othe goes down...but what if you put it level and super glue the middle to the chassis woulden that make independent shocks?


edit: woops sorry cabo i should of posted this in Wheels / Tires / Suspension / Steering

micromatch wrote:i under stand that the problem with the sway bars is that one wheel goes up..othe goes down...but what if you put it level and super glue the middle to the chassis woulden that make independent shocks?


edit: woops sorry cabo i should of posted this in Wheels / Tires / Suspension / Steering

In theory yes, but it prolly won't work 'cause the sway bar is too stiff. Best thing is to get rid of the sway bar all together and put springs in instead.

ph2t.

i just noow obught a set of springs and rare earth magnets from rcmod...i kind of regret it tho cause i was looking through the forums and it looks to me like ph2t`s springs are the shizzle

each to their own, I'm sure there's many other good sources.....

You have the right idea but you can't super glue it though.

The mini rc cars is only so heavy, the sway bar is actually pretty stiff. In theory the sway bar is for making sharp turns so your car doesn't shift too much in a real automobile.

The cars don't have too much ground clearance as it is so suspension honestly really doesn't matter too much since you're not jumping off ramps.

The car would always bottom out.

Hey ph2t

I do have to give you props on your car headlights.

That is really cool

Thanks