Im also pissed
- crusty
- bitPlaya'
- Posts: 105
- Joined: Fri Oct 10, 2003 6:53 pm
- Location: Staten Island,NY
Im also pissed
Im also pissed and its also about a dual cell too.
This pisses me off so much cuz i've been through like 5 clones in a couple of days which wre like 10$ each.
I followed every instruction and it still dosent wokr i got the instructions from here:
http://www.rcmod.com/mod_dualcell.html
The problem is that the car wont charge when i put it on the harger and i did the charger thing too.
Could the problem be that i used a clone?
I used 2 nimh batts and the car runs fine with one
This pisses me off so much cuz i've been through like 5 clones in a couple of days which wre like 10$ each.
I followed every instruction and it still dosent wokr i got the instructions from here:
http://www.rcmod.com/mod_dualcell.html
The problem is that the car wont charge when i put it on the harger and i did the charger thing too.
Could the problem be that i used a clone?
I used 2 nimh batts and the car runs fine with one



- SuperFly
- bitPimp
- Posts: 2760
- Joined: Mon May 05, 2003 6:37 pm
- Location: nationwide
What do you mean you did the charger thing? You will need 4.5v to charge a dual cell. Here's something to check: does the car function while it is on the charger? Stick it on the charger. Does the light come on? Does the steering and motor work while it is on the charger?
If you can take a picture of your car or describe the situation a little more thoroughly, I could give you better advice.
Clones don't usually present problems that you wouldn't have with non-clones, unless you took the PCB out, and then some need to be wired differently.
If you can take a picture of your car or describe the situation a little more thoroughly, I could give you better advice.
Clones don't usually present problems that you wouldn't have with non-clones, unless you took the PCB out, and then some need to be wired differently.
Last edited by SuperFly on Tue Mar 02, 2004 10:24 pm, edited 1 time in total.
- TMP
- bitGangsta'
- Posts: 281
- Joined: Thu Jan 22, 2004 10:08 pm
check all your soldirings closing, remember the electricity only runs in a circut, so if it makes sense, it will work. Clones are just the same as bit char-g`s, same basic everything except a few minor things. if you have a camera... post some pics and give the pimps a birds eye view of this.
The METALLIC Pimp.
-
- Site Admin
- Posts: 10259
- Joined: Tue Dec 10, 2002 4:05 pm
- Location: The Adult Table
- Contact:
seems like most of the time, pimps have trouble with wires coming loose and not connecting or smashing the pcb back down over the wires causing a short some where.
this article may help you as well, it's a dual cell mod:
http://bitpimps.lixlink.com/pages/artic ... 17&catId=7
this article may help you as well, it's a dual cell mod:
http://bitpimps.lixlink.com/pages/artic ... 17&catId=7
Dear Life Cereal, Where do you get off? Part of a balanced breakfast and delicious? Who do you think you are? By now you may have guessed I'm speaking ironically and have nothing but good things to say about what you do. Life cereal do not change a thing.
- crazydave
- bitPimp
- Posts: 6874
- Joined: Thu Apr 17, 2003 9:05 am
- Location: Koolsville
I was always having problems with dual cells, and 90% of the time it was due to a short. Now I use my multimeter to double check voltage every step of the way, and that way if I have a problem, I discover it right away.
I feel safer that way, because a shorted battery could easily be permanently damaged. So it's best to find out what's going on right away, so you can fix it before there's any permanent damage.
I feel safer that way, because a shorted battery could easily be permanently damaged. So it's best to find out what's going on right away, so you can fix it before there's any permanent damage.
- crusty
- bitPlaya'
- Posts: 105
- Joined: Fri Oct 10, 2003 6:53 pm
- Location: Staten Island,NY
- crusty
- bitPlaya'
- Posts: 105
- Joined: Fri Oct 10, 2003 6:53 pm
- Location: Staten Island,NY