Motor works car ------help !!!!! steering magnets??????

filelicker · Post by **filelicker** » Thu Apr 29, 2004 4:06 pm

A little neighbor girl brought me her pink motorworks truck syaing it won't steer {I have become the town r/c guru since everyone found out I have little cars}
So now I am stuck , what holds the twin steering magents in on a motorworks car , glue ? or am I missing something , when I pulled the body the magnets were out of the car stuck to each other in the open area by the steering coils{ ass backwards from anything I have seen the coils move and the magnets are supposed to stay stationary.
Any help or a pic of the top of a motorworks chassis would help.

payaso · Post by **payaso** » Thu Apr 29, 2004 4:28 pm

Make sure you get the polarity correct, and then super glue them bitches back in...

silla

Bird · Post by **Bird** » Thu Apr 29, 2004 4:34 pm

Yeah..... they go on the sides, where the coils are on conventional set-ups, just make sure they are facing the right way like payaso said... also, while you're in there, clean out any little metal shavings and gunk that you will probably come across, since they had the BRILLIANT(not) idea of leaving the front end open to the elements.

filelicker · Post by **filelicker** » Thu Apr 29, 2004 5:38 pm

How do you know when the polarity is correct?
repelling or attracting?
blue dots?

crazydave · Post by **crazydave** » Thu Apr 29, 2004 7:54 pm

I made note of the blue dots when I took mine out one time, but if they were already out, then you'll have to charge it up, to check it with the controller. Set the magnet in there, hold the steering arm in place, and when you hit the button it will either repel or attract, you want it to attract. The magnet on the driver's side turns the car right.

Bird · Post by **Bird** » Thu Apr 29, 2004 10:58 pm

OK, I just opened up both of my motorworks.... dammit there's no dots in there! Is this one of the ones where the board cover and motor clip are one big goofy piece, or one of the other ones? The two I have had a red led on top of the board cover(long since removed)... I have seen some different ones but never got around to buying them... sg219 has one of the 3 window coupe looking ones, and a few of the military vehicle ones, but I don't remember exactly what the chassis' looked like, just that they were different than the ones I have... Sorry, filelicker, I wish I could help...

filelicker · Post by **filelicker** » Fri Apr 30, 2004 3:22 pm

"one of the ones where the board cover and motor clip are one big goofy piece"
Thats the one , I am just going to try the best I can to fix the up for her .
Thanks for the help guys!

filelicker · Post by **filelicker** » Fri Apr 30, 2004 10:08 pm

I have tried every possible combination of magnet positions with no effect . I am just going to go to walmart and get her a new one , since I couldn't fix this one for her.

Finks · Post by **Finks** » Sat May 01, 2004 10:50 am

Awww what a softie. That is unless you stepped on it or some ill shit like tha.