The project...

mod_o_matic · Post by **mod_o_matic** » Wed Apr 27, 2005 12:13 pm

Arighty...
The project goal: On hell of a fast mofo bit!
The plan:
Chop up a Lxx clone. Make a wider and long alumminum chassis. Pop on some huge mofo wheels. Either a ZZMT motor or similar in size. Possible dual 2.2 motors too...

Steering will remain the same but the rear pod will be totaly redone so that it will use a simpler gearing systum (take away the center gear)

Inside the hood of this monster i hope to use 1/3 aaa at first and then 1/4aaa to give 3.6 volts!

Things i need to know:
Is there any FET mods for MicroSizers or Bit Char G?
How much load can a regular bit board take?
Any spacfic wheels some people use to thicken (and get more grip) while looking good?
What possible body?
* i am thinking any thing easy to chop..then extend and then make it fit nice..some leds and its the shit!*

What ya think?

Finks · Post by **Finks** » Wed Apr 27, 2005 1:54 pm

mod_o_matic wrote: Things i need to know:
Is there any FET mods for MicroSizers or Bit Char G?
Any spacfic wheels some people use to thicken (and get more grip) while looking good?
What possible body?
* i am thinking any thing easy to chop..then extend and then make it fit nice..some leds and its the shit!*

What ya think?

Well not to hand feed you all that you are doing but as for FET mods, yeah dude of course, do a search and you will find all that you need. The Hood is famouse for our work w/ fetting boards.

The wheels is easy, get the fatty Zip Zap wheels for the back. Body wise... don't bother modding a bit body, just use a Zip Zap shell, one of the muscle cars would fit well.

Course now that I have said all of this... well it's allready been done before, just check out CD's Prostocker. GL surpassing that bastard.

Read about it here
http://bitpimps.lixlink.com/pages/phpFo ... prostocker

mod_o_matic · Post by **mod_o_matic** » Wed Apr 27, 2005 2:45 pm

FET wise i was just thinking about if it can be done some what easily on any Car or what not..

hue35 · Post by **hue35** » Wed Apr 27, 2005 3:02 pm

mod_o_matic wrote:FET wise i was just thinking about if it can be done some what easily on any Car or what not..

Man, you's like a poet and stuff.

mod_o_matic · Post by **mod_o_matic** » Wed Apr 27, 2005 5:03 pm

hue35 wrote:
mod_o_matic wrote:FET wise i was just thinking about if it can be done some what easily on any Car or what not..
Man, you's like a poet and stuff.

HUH! Com'on back on topic foo

betty.k · Post by **betty.k** » Wed Apr 27, 2005 5:22 pm

any electric rc can benefit from a fet mod.
pullback rims is fat.

talk gooder english.

hue35 · Post by **hue35** » Wed Apr 27, 2005 5:29 pm

mod_o_matic wrote:HUH! Com'on back on topic foo

OK, pud, let me roll up my sleeves and see if I can't participate in this here "topic"...

uh ya dang fas bit awsum gonn makit fas & 1/4aee + 1/3 then 4th it gwine simplar strechn stuff cuz i tockin right out my bung dun no but you gon tel me rite? cuz n stuff i herd dool moters & fets & korter trippel-A gits ya 3.6volts n pluss da fet mod is ossum if ya cn doit to bit so its gon ta fli fass.

mod_o_matic · Post by **mod_o_matic** » Wed Apr 27, 2005 7:28 pm

DAMIT...STOP WITH THAT NOW!

I REALLY just want to stay on topic with a side order of some of the hood!

hue35 · Post by **hue35** » Wed Apr 27, 2005 8:03 pm

mod_o_matic wrote:DAMIT...STOP WITH THAT NOW!

I REALLY just want to stay on topic with a side order of some of the hood!

Yeah, that's what I was doing... it's not my fault your topic is too hard to understand. The answers to your questions have been covered, and the rest is just you talkin' (barely) about shit you probably won't do... I hope you prove me wrong, but in the mean time, settle the hell down.

steelwoolghandi · Post by **steelwoolghandi** » Wed Apr 27, 2005 9:22 pm

Well I got ya’ll beat I hooked up my .40 Gas motor to my 4X4 Super Slick no fets on this monster just all motor!!! Top that you slowpokes!!!

SWG

Post by **CaboWabo** » Wed Apr 27, 2005 10:43 pm

Get any inspiration from those Japanese cars we saw recently (aka spatula sled)

mod_o_matic · Post by **mod_o_matic** » Thu Apr 28, 2005 2:49 pm

hue35 wrote:
mod_o_matic wrote:DAMIT...STOP WITH THAT NOW!

I REALLY just want to stay on topic with a side order of some of the hood!
Yeah, that's what I was doing... it's not my fault your topic is too hard to understand. The answers to your questions have been covered, and the rest is just you talkin' (barely) about shit you probably won't do... I hope you prove me wrong, but in the mean time, settle the hell down.

Smack bitch!

I already got started. Changed it up tho...makeing a plexi chassie so teh motor fits in better. I am useing this motor from this plane thingy...its got good touque and should work nicely. Basically instead of having a pinion i am just use the center gear...as it fits basically perfectly on the motor i have...

Next, gonna plan out some sort of rear suspension, something like betty.k did and possibly something similar to the front:D

No pics yet, but i shall borrow my friends digi cam ASAP

hue35 · Post by **hue35** » Thu Apr 28, 2005 4:45 pm

mod_o_matic wrote:Smack bitch!

Go fuck yourself.

mod_o_matic wrote:No pics yet, but i shall borrow my friends digi cam ASAP

That woulda been the place to start... have your project started and post up some pics of the work in progress.

But hey, it sounds like you're off to a good start... now, hurry up with them pics and get this project rollin'.

mod_o_matic · Post by **mod_o_matic** » Thu Apr 28, 2005 8:02 pm

hue35 wrote: Go fuck yourself.

I love you too...

I wish i had a digi cam

But i don't so it will be major steps. I will try to get a pic of the bare chassis when i get it done. I am trying many diffrent ways so until i get it rite then i will post pics..

sg219 · Post by **sg219** » Fri Apr 29, 2005 1:23 am

This is good shit!!!

bitPimps.lixlink.com

The project...

The project...

Re: The project...