12K SE with plenty of torque
Posted: Tue Jun 14, 2005 5:11 am
Start with a stock Shelby - 4Km/h
Add a 34K NX Motor - 6Km/h
A red gear set - 7Km/h
Then FETs - 8Km/h
Stack the forward P & N channel FETs - 9Km/h
Forward bypass mod - 10Km/h
Finally a LiPo - 12Km/h
By using the bypass mod and stacking only the forward FETs reverse is still plenty fast but much more manageable, in fact it wouldn’t hurt to only mod the forward half of the H-bridge leaving the reverse stock.
Add wide rear tires to help keep it upright, a lowered Integra body with underglow for fun and a visual reminder that the car needs to be switched off when your done to save the LiPo.
Add a 34K NX Motor - 6Km/h
A red gear set - 7Km/h
Then FETs - 8Km/h
Stack the forward P & N channel FETs - 9Km/h
Forward bypass mod - 10Km/h
Finally a LiPo - 12Km/h
By using the bypass mod and stacking only the forward FETs reverse is still plenty fast but much more manageable, in fact it wouldn’t hurt to only mod the forward half of the H-bridge leaving the reverse stock.
Add wide rear tires to help keep it upright, a lowered Integra body with underglow for fun and a visual reminder that the car needs to be switched off when your done to save the LiPo.
