Page 1 of 1
ZZ SE problem: steering stays to the right
Posted: Mon Jul 25, 2005 8:59 pm
by dbxl
Hi,
new here...
Just got the ZZ. It was running fine, then all of the sudden the steering doesn't respond, and just stays to the far right. I tried messing with the steering trim, wheel alignment, retried recharging.
Whe I try to steer it, I hear the servos working...
Have anyone seen this problem before?
Re: ZZ SE problem: steering stays to the right
Posted: Mon Jul 25, 2005 9:09 pm
by stagg
dbxl wrote:Hi,
new here...
Just got the ZZ. It was running fine, then all of the sudden the steering doesn't respond, and just stays to the far right. I tried messing with the steering trim, wheel alignment, retried recharging.
Whe I try to steer it, I hear the servos working...
Have anyone seen this problem before?
Well, Check to see if theres some wires messed up. If you dont feel comfertable poking around in there, return it. RS has a GREAT return policy.
Posted: Mon Jul 25, 2005 9:12 pm
by evoraptor
RS has a GREAT return policy.
sure....
Posted: Mon Jul 25, 2005 9:34 pm
by arfin
I'm guessing one of the pot wires came off, check that out.
Posted: Tue Jul 26, 2005 10:44 am
by dbxl
thanks. I just returned it. Although next time I'll try to fix it myself
Posted: Tue Jul 26, 2005 12:26 pm
by Finks
The other thing it could be is due to debris. Either metal flakes stuck to the steering magnet or most likely hair and crap built up in there. But like said before, if in the first month you have an issue w/ a ZZ, receipt or not, shoot that fucker back to RS.
Posted: Tue Jul 26, 2005 2:29 pm
by pimpsmurf
If the resistor you remove for the Duty Cycle mod board is gone, if does the same thing. Btw, remove your batteries before you solder! I rock
-JNY