Page 1 of 1
Tring to convert a 4.2v Cell Phone into a charger
Posted: Sat Nov 26, 2005 6:31 pm
by Bithigh707
Sup Pimp'z I just got done adding another cell pack from a old ZZ SE now making it quad cell but now i need to make a stand alone for I came up with my old cell wall charger it puts out a 4.2v. Is there a Tut. on how to do this? There's four wires on the ZZSE charger stand White,Red, Black and Yellow and there's 6 wires on the cell charger White,Red,Black,Yellow,Blue and green.What colors should I connect.
Posted: Sat Nov 26, 2005 10:39 pm
by sat4life27
All you really need to worry about is the + and - leads to the batts and the + and - leads on the output side of the charger. However I am not sure if the 4.2v output will be enough to work. To charge the 4.6v batts you should try to put at least 6v to them to get a good charge.
The white and yellow wires are for the freq changes to the car (I might be wrong). As for the extra wires on the charger. I have not a clue. You might want to find something else to use for the charger.
Charger
Posted: Wed Nov 30, 2005 4:50 pm
by Bithigh707
Ok so I found a 5.7 charger and I let my car sit for about 5 mins. but nothing happen thee only way the car would run was on the charger now I am going to just pay someone to hook up my ZZ with FETS or whatever since my car is a 1 or 2 Gen. ZZSE and also have it celled up and a charger.
