bitPimps.lixlink.com

ive had this se sittin here for a while, time i revived it. had a kokam 145 in it, that was tossed in a another car, now im left with my old se cell. problem is after sittin in a bucket of parts for a few months the wires seemed to have started falling off. i had the schematic written down for my gen1 but its def. diffrent and i missed the one wire i think that isnt letting it work.

i have wired it all up to the best of my guessing and it does nothing, when its on the charger i get the great yellow light . the wire i think may be stopping it is the black one by the motor, the middle contact on the bottom.


i made a paint hoping someone can fix an error or show me where this black one may go.




this car is a starsky and hutch, gen3 i believe.

You got the ground wire in the wrong place, and the green steering wire, I'm not sure is correct either, but the ground is the one that will keep it from working at all.

Here's a picture, see if this helps

looks right i will try that later

Oh yeah... disregard the white arrow in the pic, that was just something I was doing at the time I took the pic.

hey cd i have a q,
since i dont have the stock wires for color reference- that white wires is the ground correct?
othere than that i had it near right

I think that white wire is the channel assign if, I remeber right.

got it to work, now i just need some new 1/4 aaa's these ones i got are shot.

got this in mind
http://www.balsapr.com/view.asp?id=A0320104&pid=U748546