Pan Chassis

PimpIke · Post by **PimpIke** » Fri Jun 20, 2003 3:55 pm

Alright, after all this smack talk, I've got a pan chassis in the works, gimme a week or two to get it done, but ill post pics along the way to see how everybody is thinking, and how were gonna do this togetha

hogjowlz · Post by **hogjowlz** » Fri Jun 20, 2003 4:06 pm

search tinyrc some guy made one out of a sheet of aluminiuminuminum. it could work very well if you got the right tools.

PimpIke · Post by **PimpIke** » Fri Jun 20, 2003 4:13 pm

no, i don't have the right tools and im using a stock bit chassis. Hog, im not going to use JB weld either, so im taking it on my own risk, i think that i will make this thing come through.

hogjowlz · Post by **hogjowlz** » Fri Jun 20, 2003 4:15 pm

you just gona chop off the sides?

PimpIke · Post by **PimpIke** » Fri Jun 20, 2003 4:21 pm

nope, im working on a mini-z style h-plate too, and im going through the whole chassis making it quite a bit lighter too

hogjowlz · Post by **hogjowlz** » Fri Jun 20, 2003 4:22 pm

word to yo mutha

PimpIke · Post by **PimpIke** » Fri Jun 20, 2003 4:57 pm

ok this is what im going to do, i have a spare 27mhz ZZ chassis, gonna cut it up, make it a pan chassis, then ill get somebody to slap in a BIT PCB, and it'll sit down, right infront of the Battery, whatcha thing hog?

hogjowlz · Post by **hogjowlz** » Fri Jun 20, 2003 4:59 pm

sounds great. ill do it for ya if you are afraid to solder.

PimpIke · Post by **PimpIke** » Fri Jun 20, 2003 5:02 pm

aight aight, after im done, ill send the PCB and the car to you, ill have u solder the shit together, and then u can send it back to me and we will have the HOG & IKE CORP. PAN CHASSIS

hogjowlz · Post by **hogjowlz** » Fri Jun 20, 2003 5:07 pm

wordup

PimpIke · Post by **PimpIke** » Fri Jun 20, 2003 5:48 pm

i got some pics'

http://www.pbase.com/image/18067541/original

http://www.pbase.com/image/18067536

http://www.pbase.com/image/18067530