Ordered some Saphion batteries 3s1p 9.6v 1200mah
- Clint
- bitPimp
- Posts: 519
- Joined: Sun Jul 06, 2003 7:20 am
- Location: Albany, NY
- Contact:
Ordered some Saphion batteries 3s1p 9.6v 1200mah
http://www.power-motion.com/shop/index. ... egory&id=1
Gonna test it out in the M18, should be a perfect balance between
the 2s and 3s lipo.
2s with the 8000kv mamba was fast, but I became used to the speed
and wanted more. 3s was a bit too fast and really heat up the little brushless motor. 9.6v should be perfect.
Product Overview
3s1p 9.6 volt 1.2Ah 18amp cont/28 amp peak
Product Details
Saphion power cell pack
Phosphate cathode system, no thermal runaway (safer than lipo/lion, will not explode, catch fire etc)
3 series cells to give 9.6 volts.
Weight 126gms(less weight than my 3s1p 1250, but more than the 2s1p 1250)
Charging: 3 series cell setting (LiPo or Li-Ion) 12.6 max
Max charge current 2.4amps (2C) nice!
Max discharge currents:
Continuous 18 amps
Peak 28 amps
discharge down to 2v per cell.
btw you can also buy these as singles for 2s1p, perfect for XMODS.
Gonna test it out in the M18, should be a perfect balance between
the 2s and 3s lipo.
2s with the 8000kv mamba was fast, but I became used to the speed
and wanted more. 3s was a bit too fast and really heat up the little brushless motor. 9.6v should be perfect.
Product Overview
3s1p 9.6 volt 1.2Ah 18amp cont/28 amp peak
Product Details
Saphion power cell pack
Phosphate cathode system, no thermal runaway (safer than lipo/lion, will not explode, catch fire etc)
3 series cells to give 9.6 volts.
Weight 126gms(less weight than my 3s1p 1250, but more than the 2s1p 1250)
Charging: 3 series cell setting (LiPo or Li-Ion) 12.6 max
Max charge current 2.4amps (2C) nice!
Max discharge currents:
Continuous 18 amps
Peak 28 amps
discharge down to 2v per cell.
btw you can also buy these as singles for 2s1p, perfect for XMODS.