Page 1 of 2

Showcar buildup

Posted: Mon May 12, 2008 10:48 pm
by Murdoch
Might as well do a WIP thread for this drift demo showcar I'm building.

It all started with an idea to make a realistic as possible model given the time and funds available. Also to kick the current driftking's ass. ;)


What better way to do that than with a Saleen S7R supercar with a custom paintjob?

Nekkidness:
Image

Starting off with the small bits first.


Lightbuckets, wired up and ready to go.
Image

Posted: Tue May 13, 2008 5:33 pm
by Murdoch
First coat is on and it looks pretty damn good.

Image

Posted: Tue May 13, 2008 5:57 pm
by CaboWabo
Great shade of blue! :-o

Posted: Wed May 14, 2008 6:04 am
by Murdoch
hey thanks man.

Did the pinstripe speedflame today. Will be cut out and used on the hood.

Image

Posted: Thu May 15, 2008 9:04 pm
by evoraptor

Posted: Fri May 16, 2008 1:11 am
by Murdoch
I'm going to go with either these:
http://www.hpiracing.com/piw4.php?part=3772

or these if they're available:
http://www.hpiracing.com/piw4.php?part=3712

Posted: Fri May 16, 2008 5:20 pm
by Murdoch
So far so good. I wanted to go with flames on the hood originally but the mask proved to be a bitch in that area. So I decided to go with double pinstripes instead.

Image

The boys heard what was going on and decided to pay the shop a visit.
Image

Posted: Tue May 20, 2008 4:30 pm
by Murdoch
Final color is on and now it's back in for clearcoating. Keep in mind this is my first attempt at freehand pinstripe cutting.

Image
Image

Posted: Tue May 20, 2008 9:33 pm
by Maxximum Attack
I'd go with evoraptor, the Work XSA's would look sweet on that. Plus the deep dis would set that supercar off nicely. 0mm offset is soooooo out :? it's all about 6mm+ now :-o

The car's coming along nicely tho

Posted: Wed May 21, 2008 8:36 am
by crazydave
Maxximum Attack wrote:I'd go with evoraptor, the Work XSA's would look sweet on that. Plus the deep dis would set that supercar off nicely. 0mm offset is soooooo out :? it's all about 6mm+ now :-o

The car's coming along nicely tho
I don't know about offsets and what nots, but I think the black centers would really set that awesome shade of blue off.

Posted: Wed May 21, 2008 4:09 pm
by Murdoch
That's assuming I can get them at the LHS. right now, ordering parts is out. too close to the scheduled show date.

Posted: Wed May 21, 2008 8:51 pm
by Maxximum Attack
crazydave wrote:
Maxximum Attack wrote:I'd go with evoraptor, the Work XSA's would look sweet on that. Plus the deep dis would set that supercar off nicely. 0mm offset is soooooo out :? it's all about 6mm+ now :-o

The car's coming along nicely tho
I don't know about offsets and what nots, but I think the black centers would really set that awesome shade of blue off.
you use different offset to fit the rims flush with the side of the car. 190mm bodies are designed to mainlly use 0mm offset rims. That is, when the rims go on the chassis they fill out the body.

Recently, HPI has stopped making 190mm bodies, since the trend toward deep-dish rims. Making 200mm bodies for electric cars means that the bodies are now 5mm wider at each wheel and encourages deep dish rims.

I have a narrow chassis, so I have to use 7mm offset to fill a 190mm body. :cool:

Hope that helped

Posted: Thu May 22, 2008 4:25 am
by Murdoch
Shell's done. a few things left to do such as wire up the other lights (little party piece I came up with) and some decals.. and i'll be set.

Image
Image
Image
Image


It turned out alright. Not as good as the Zonda but pretty close. Looking at the body and the way it sits on the chassis, I'll definitely go with an offset in the rears.


the white LED headlamps threw the camera's white balance off a bit.

Posted: Thu May 22, 2008 6:38 am
by betty.k
definately offset those rears, fill dem wheelwells. :-o

Posted: Thu May 22, 2008 8:06 am
by Maxximum Attack
...at least 6mm
3mm in the front