Servo Help!!
-
vwmicrosizer
- bitGimp
- Posts: 196
- Joined: Sun Jul 13, 2008 2:42 am
- Location: Alaska, usa
Servo Help!!
i got a hitec HS-55 micro servo for my mini T. when i went to plug it to the reciever(which is stock) i noticed that the plug in is a 4 wire i tried plugging it into it several different ways. but nothing worked. i plugged it into my associated sc18 and the servo worked fine. i checked the atomicmods website and sent them a message about it. i looked at their HS-55 servo and it is a 3 wire servo also. please any help would be greatley appreciated.
Dave i know you know alot about these things.
Dave i know you know alot about these things.
-
sidewinder
- bitProphet
- Posts: 3165
- Joined: Wed Apr 25, 2007 6:31 pm
- Location: Walmart
Re: Servo Help!!
Does it actually say HS-55 on it? I'm wondering if they sent you a digital servo like the HS-5085MG, because with an analog I have no idea of what the 4th wire would do? Not really sure with the digital either, but that's just because I've never messed around with one. 
The smallest minority on earth is the individual. Those who deny individual rights cannot claim to be defenders of minorities. - Ayn Rand
-
vwmicrosizer
- bitGimp
- Posts: 196
- Joined: Sun Jul 13, 2008 2:42 am
- Location: Alaska, usa
Re: Servo Help!!
yes it does say HS-55 on it. i got a email back from atomicmods and they said i would have to get a new reciever and esc! 
so im going to hafe to spend ANOTHER $20 on a servo. but atleast if a servo breaks in my sc18 i can put it in that
so im going to hafe to spend ANOTHER $20 on a servo. but atleast if a servo breaks in my sc18 i can put it in that-
Pork_Hunt
- bitHood
- Posts: 31
- Joined: Sun Apr 08, 2007 7:49 pm
- Location: Noble Park, Vic
Re: Servo Help!!
You should be able to hack it on to the stock rx/esc combo. You will need to remove the servo electronics and rewire the stock electronics. Search around and I am sure you will find something. If not, post a reply and I will do the leg-work for you...
-
vwmicrosizer
- bitGimp
- Posts: 196
- Joined: Sun Jul 13, 2008 2:42 am
- Location: Alaska, usa
Re: Servo Help!!
well the board from the original servo got busted so no using thatPork_Hunt wrote:You should be able to hack it on to the stock rx/esc combo. You will need to remove the servo electronics and rewire the stock electronics. Search around and I am sure you will find something. If not, post a reply and I will do the leg-work for you...