Ahh5hit's House Of Wheels now open for business on Xmods.

Ahh5hit · Post by **Ahh5hit** » Sat Oct 18, 2003 1:33 pm

My first Xmod wheel mod. They are XS Tuning wheels for model kits, but are the same size as the Xmod stock wheels. I had to drill out the d shaped hole and just slap them on.

SuperFly · Post by **SuperFly** » Sat Oct 18, 2003 1:56 pm

nice! Can you be more specific about what wheels you're using? XS Tuning wheels? Is that a toy store item or hobby store? I can see from the picture you've already got a couple hundred bux into xmods.

sessiz · Post by **sessiz** » Sat Oct 18, 2003 2:10 pm

Yeah real nice but I definatly need some more info. How did ya drill the Dshape?

Ahh5hit · Post by **Ahh5hit** » Sat Oct 18, 2003 5:17 pm

I got them at my local hobby store, but you can buy them here too...
www.xstuning.com

They have a few different styles. To drill the D shape hole, I just drilled smaller than the hole I want, then used an X-acto knife to shape it from there.

It's more like over $300 once you include about 2 of every upgrade.

sessiz · Post by **sessiz** » Sat Oct 18, 2003 6:36 pm

Do the xmod rubbers fit well on them rims?

grnmachnracr · Post by **grnmachnracr** » Fri Oct 24, 2003 2:08 pm

what do u have to do to the rims exactly ould we have a step by step? i want them for my white supra

Ahh5hit · Post by **Ahh5hit** » Sat Oct 25, 2003 1:54 pm

sessiz wrote:Do the xmod rubbers fit well on them rims?

Yes, the rubber is interchangable, but the only difference is the Xmod wheels have the center ridge and the XS wheels don't. The next time I do this mod, I'll take pics and do a tutorial on how I cut the D holes out.

Maxximum Attack · Post by **Maxximum Attack** » Sun Oct 26, 2003 12:01 pm

do you think that mini-z rims will fit?

They have a wider selection.

VooDooMafia · Post by **VooDooMafia** » Sun Oct 26, 2003 12:41 pm

Maxximum Attack wrote:do you think that mini-z rims will fit?

They have a wider selection.

Dont think so as the xmods use a D shaped axle

sessiz · Post by **sessiz** » Sun Oct 26, 2003 10:21 pm

I had a thought on how to get some miniZ rims up on here.

You could probably just jam some paper or gum or whatever into the gap created by the Dcut. That and a tight nut would probably work well. I guess I'll have to try it.

VooDooMafia · Post by **VooDooMafia** » Sun Oct 26, 2003 10:28 pm

sessiz wrote:I had a thought on how to get some miniZ rims up on here.
You could probably just jam some paper or gum or whatever into the gap created by the Dcut. That and a tight nut would probably work well. I guess I'll have to try it.

If you want I got some Z wheels kickin around let me know

hogjowlz · Post by **hogjowlz** » Sun Oct 26, 2003 10:30 pm

sessiz wrote: You could probably just jam some paper or gum or whatever into the gap created by the Dcut.

hmm maybe some jbweld? haha laugh now but not after it works.

VooDooMafia · Post by **VooDooMafia** » Sun Oct 26, 2003 10:35 pm

hogjowlz wrote:
sessiz wrote: You could probably just jam some paper or gum or whatever into the gap created by the Dcut.

hmm maybe some jbweld? haha laugh now but not after it works.

LOL you and your jbweld almost makes me think that they send you a check for the endorsments lol

I will say though it would prolly work cause after that shits dry you can juts file her down to size/shape

noxorc · Post by **noxorc** » Mon Oct 27, 2003 7:06 am

Wow...over $300 beans...you can't be married or you got your own source of income and your not sharing.