Ma'Drifter STI (updated video link)
- ynad
- bitNinja
- Posts: 776
- Joined: Fri Apr 30, 2004 12:22 am
- Location: NYC/NJ
Ma'Drifter STI (updated video link)
The car. 99% complete, some more of decals and it's done.
The chassis.
the mount plate
now this one is NOT a shelf queen. it really gets the beating.
EDIT >
Some specs:
modified body - fender flares, front bumper, side skirts, open windows.Shell sits down low covering chassis completly.Functional air scoop. Single windshield wiper. Altezza wing.
Mini-z MR-02 PCB.
Mini-t servo.
Stage 2 8 tooth pinion + NEO mags.
v2 turbo ( not working at this time) apparently car runs better without it.
Clear chassis, carbon fiber front and rear decks.
Carbon shaft.
Aluminum drive shafts and dog bones.
The chassis.
the mount plate
now this one is NOT a shelf queen. it really gets the beating.
EDIT >
Some specs:
modified body - fender flares, front bumper, side skirts, open windows.Shell sits down low covering chassis completly.Functional air scoop. Single windshield wiper. Altezza wing.
Mini-z MR-02 PCB.
Mini-t servo.
Stage 2 8 tooth pinion + NEO mags.
v2 turbo ( not working at this time) apparently car runs better without it.
Clear chassis, carbon fiber front and rear decks.
Carbon shaft.
Aluminum drive shafts and dog bones.
Last edited by ynad on Mon Feb 06, 2006 8:36 am, edited 6 times in total.
- betty.k
- bitPimp
- Posts: 4090
- Joined: Fri Dec 26, 2003 4:52 pm
- Location: la la land
- Contact:
- ynad
- bitNinja
- Posts: 776
- Joined: Fri Apr 30, 2004 12:22 am
- Location: NYC/NJ
- Zenith
- bitGangsta'
- Posts: 455
- Joined: Sun Jun 19, 2005 10:15 pm
- Contact:
-
- bitDisciple
- Posts: 1798
- Joined: Thu Jul 31, 2003 7:15 pm
- Location: Barbados
- Zenith
- bitGangsta'
- Posts: 455
- Joined: Sun Jun 19, 2005 10:15 pm
- Contact:
- HACHI-RYOKU
- bitPimp
- Posts: 714
- Joined: Wed Nov 05, 2003 3:40 am
- Location: Virginia Beach, Virginia
I like it. I would recomend a plasma-atomic motor.
Here's the tutorial by PH2T. Well worth it. I've made one of these motors and I have the motor components for at least 3 more.
http://bitpimps.lixlink.com/pages/phpFo ... php?t=5665
Also, you say the V2 board is not working eh? Is it a V2.2? I have been looking at these and was curious about them myself. They seem like the best way to run lithiums without a Nelly Delluxe.
Here's the tutorial by PH2T. Well worth it. I've made one of these motors and I have the motor components for at least 3 more.
http://bitpimps.lixlink.com/pages/phpFo ... php?t=5665
Also, you say the V2 board is not working eh? Is it a V2.2? I have been looking at these and was curious about them myself. They seem like the best way to run lithiums without a Nelly Delluxe.
Cause I ride around town on my low-rider bicycle.
- ynad
- bitNinja
- Posts: 776
- Joined: Fri Apr 30, 2004 12:22 am
- Location: NYC/NJ
I appreciate your replies. means a lot, coming from da' pimps.
the v2 is most likly is the first version, i have it for 3+ years now. it was good but now it's fucked
once i will get the new turbo or fet mod the plasma-atomic motor is my choice.
i wish i could inflict more damage to the car, but this holiday season i'm too busy to run it as much as i'd like. rest assured i will post the damage report.
Enjoy these holidays pimps and a happy new year
the v2 is most likly is the first version, i have it for 3+ years now. it was good but now it's fucked
once i will get the new turbo or fet mod the plasma-atomic motor is my choice.
i wish i could inflict more damage to the car, but this holiday season i'm too busy to run it as much as i'd like. rest assured i will post the damage report.
Enjoy these holidays pimps and a happy new year
- ynad
- bitNinja
- Posts: 776
- Joined: Fri Apr 30, 2004 12:22 am
- Location: NYC/NJ
more pics.
I just love this motherfucker. took her for a spin. it drifts on the tennis court (gripy surface). the control is better then on hard wood floor.
overall great fun.
EDIT: > some video
http://bitpimps.lixlink.com/pages/phpGa ... 220&pos=63
it was unusualy warm for January today in NYC. Perfect weather for a drift.
I just had a photo cam and just decided to shoot some vid.
quality isn't as good... turned out I liked it. Not that bad
seems gallery cropped image a bit it's OK
I just love this motherfucker. took her for a spin. it drifts on the tennis court (gripy surface). the control is better then on hard wood floor.
overall great fun.
EDIT: > some video
http://bitpimps.lixlink.com/pages/phpGa ... 220&pos=63
it was unusualy warm for January today in NYC. Perfect weather for a drift.
I just had a photo cam and just decided to shoot some vid.
quality isn't as good... turned out I liked it. Not that bad
seems gallery cropped image a bit it's OK
- ynad
- bitNinja
- Posts: 776
- Joined: Fri Apr 30, 2004 12:22 am
- Location: NYC/NJ
-
- bitDisciple
- Posts: 1798
- Joined: Thu Jul 31, 2003 7:15 pm
- Location: Barbados
- steelwoolghandi
- bitPimp
- Posts: 1696
- Joined: Fri Jun 11, 2004 11:53 am
- Location: RIGHT BEHIND YOU!!
- Contact: