A BajeDrift WIP
Posted: Sun Jul 06, 2008 1:33 pm
I bought myself a bunch of stuff back in May for my birthday. All that stuff was in the hopes of making a nice RC shell (to use this time
)
Yes, it's july and it still isn't finished, blame the educational system.
Here's the progress of my little project.
Edge Slide Racing Wheels Chrome,7mm & 10mm offset From Genkidoridori.com
HPI GT wing set (85612), and
HPI tuner kit (85613)

The chrome on the intercooler was peeling with the tape, so I had to do a little rescue. It looks a little rough around the edges, but alot better than it was
Before:

After
:

The shell arrived a long time after the other stuff, it's an HPI Nissan 350Z

After LOTS of drawing, erasing, re-thinking, tossing and turning, I finally came up with a paintjob. It will be Green wit 3D ghost crystals.You'll notice some bands behind the door, those will also be ghosted in different greens. But, I need a totally different green all together. One that will fill the background of the crystals. I'm thinking either mint-green, or using a light coat of smoke to make a slightly darker green.

Just a shot of the whells I'll be using

Last night I did the CF hood, roof and boot. It was a painful learning experience and well worth it, have a look:



I still have to buy the Green and other colours to finish the paintjob. Also I'll be looking into getting some decals made.
Took me about 2 months to get this far cuz of university finals, hopefully it'll be finished by the end of the month.
Lemmie know what you think of it so far
Maxx

Yes, it's july and it still isn't finished, blame the educational system.
Here's the progress of my little project.
Edge Slide Racing Wheels Chrome,7mm & 10mm offset From Genkidoridori.com
HPI GT wing set (85612), and
HPI tuner kit (85613)

The chrome on the intercooler was peeling with the tape, so I had to do a little rescue. It looks a little rough around the edges, but alot better than it was

Before:

After


The shell arrived a long time after the other stuff, it's an HPI Nissan 350Z

After LOTS of drawing, erasing, re-thinking, tossing and turning, I finally came up with a paintjob. It will be Green wit 3D ghost crystals.You'll notice some bands behind the door, those will also be ghosted in different greens. But, I need a totally different green all together. One that will fill the background of the crystals. I'm thinking either mint-green, or using a light coat of smoke to make a slightly darker green.

Just a shot of the whells I'll be using


Last night I did the CF hood, roof and boot. It was a painful learning experience and well worth it, have a look:



I still have to buy the Green and other colours to finish the paintjob. Also I'll be looking into getting some decals made.
Took me about 2 months to get this far cuz of university finals, hopefully it'll be finished by the end of the month.
Lemmie know what you think of it so far

Maxx