Make adjustable shock collars
-
crazydave
- bitPimp
- Posts: 6874
- Joined: Thu Apr 17, 2003 9:05 am
- Location: Koolsville
Make adjustable shock collars
I had an extra set of shocks to make these out of. If you don't have extras you'll need a shock set (LOSB1522).
I just used an Exacto knife to cut the top off the shock caps. Then cut the screw with my Dremel so it just pokes out the other side, to press against the shock body. Finally, I coated the inside of the hole with CA glue to give the screw something to grab on to.
Here they are mounted on the shocks. Looks factory, huh?
I just used an Exacto knife to cut the top off the shock caps. Then cut the screw with my Dremel so it just pokes out the other side, to press against the shock body. Finally, I coated the inside of the hole with CA glue to give the screw something to grab on to.
Here they are mounted on the shocks. Looks factory, huh?
-
SHAUN
- bitDisciple
- Posts: 1462
- Joined: Wed Oct 05, 2005 10:35 am
- Location: On the trail
- Contact:
-
sidewinder
- bitProphet
- Posts: 3165
- Joined: Wed Apr 25, 2007 6:31 pm
- Location: Walmart
Nice work!