Make adjustable shock collars
Posted: Mon Oct 22, 2007 6:22 pm
I had an extra set of shocks to make these out of. If you don't have extras you'll need a shock set (LOSB1522).
I just used an Exacto knife to cut the top off the shock caps. Then cut the screw with my Dremel so it just pokes out the other side, to press against the shock body. Finally, I coated the inside of the hole with CA glue to give the screw something to grab on to.
Here they are mounted on the shocks. Looks factory, huh?
I just used an Exacto knife to cut the top off the shock caps. Then cut the screw with my Dremel so it just pokes out the other side, to press against the shock body. Finally, I coated the inside of the hole with CA glue to give the screw something to grab on to.
Here they are mounted on the shocks. Looks factory, huh?
Nice work!