bit pimps track

Micro s2000 · Post by **Micro s2000** » Thu Aug 07, 2003 9:51 pm

how was the track made in the gallery? what materials were used i mean

it looks real good

also i hear that the makers are from the st. louis area, well i'm from manchester and wondering how close we might live

Post by **CaboWabo** » Thu Aug 07, 2003 10:36 pm

the track was made ghetto cheap by Shredder, Da General and myself - we're all in and around the st. louis area... I'm in St. Charles

we used:
- super fine 3/4 inch thick 4 x 8 piece of particle board
- 1/2 inch plastic tubing to line out the track
- some scrap wood for the structural part of the bridge
- finishing nails to nail the tubing to the track
- couple pieces of cardboard for the bridge
- magic markers for coloring grass, turns, street names, etc.

that's bout it

Micro s2000 · Post by **Micro s2000** » Fri Aug 08, 2003 12:06 am

cool i made a cheap track too with two 2x4 peices of masonite side by side so the tracks a total of 4x4 ft. than i cut the walls out of foamboard, it was pretty cheap too but i want a bridge