Anti-boost Mod
-
MotorGong
- bitNinja
- Posts: 881
- Joined: Tue May 10, 2005 4:51 am
- Location: At the club drummin'
I was looking at my Anti-Boost controller and noticed how close the resistor is coming to the turn button.
I trimmed the resistors before soldering, maybe not enough.
It's not affecting anything at all, but if I would have soldered it a little differently then I had, the turn button might have made contact while being pressed and pushed down on the resistor.
It seems that way, but I havn't taken the controller apart again for a close inspection. It looks like it coming real close, though.
Besides all that, I've used the controller at least 20 times since I altered it, and no problems at all.
Something for nOObs and first timers to think about.
I trimmed the resistors before soldering, maybe not enough.
It's not affecting anything at all, but if I would have soldered it a little differently then I had, the turn button might have made contact while being pressed and pushed down on the resistor.
It seems that way, but I havn't taken the controller apart again for a close inspection. It looks like it coming real close, though.
Besides all that, I've used the controller at least 20 times since I altered it, and no problems at all.
Something for nOObs and first timers to think about.
BattleField 2 Stats
"Please not in the fire's neighborhood, heat, that place the spirit swim to play or take care of." ...LxxChar-G Instruction Manual
"Please not in the fire's neighborhood, heat, that place the spirit swim to play or take care of." ...LxxChar-G Instruction Manual