Showcar buildup

All discussions about 1:18 scale and up electric onroad RCs.
User avatar
Murdoch
bitDisciple
Posts: 1394
Joined: Mon May 01, 2006 8:17 pm
4 + 3 =: 0
antispamboolean: No
Location: out of nowhere and POW BABY!

Showcar buildup

Post by Murdoch »

Might as well do a WIP thread for this drift demo showcar I'm building.

It all started with an idea to make a realistic as possible model given the time and funds available. Also to kick the current driftking's ass. ;)


What better way to do that than with a Saleen S7R supercar with a custom paintjob?

Nekkidness:
Image

Starting off with the small bits first.


Lightbuckets, wired up and ready to go.
Image
User avatar
Murdoch
bitDisciple
Posts: 1394
Joined: Mon May 01, 2006 8:17 pm
4 + 3 =: 0
antispamboolean: No
Location: out of nowhere and POW BABY!

Post by Murdoch »

First coat is on and it looks pretty damn good.

Image
CaboWabo
Site Admin
Posts: 10257
Joined: Tue Dec 10, 2002 4:05 pm
4 + 3 =: 0
antispamboolean: No
Location: The Adult Table
Contact:

Post by CaboWabo »

Great shade of blue! :-o
Dear Life Cereal, Where do you get off? Part of a balanced breakfast and delicious? Who do you think you are? By now you may have guessed I'm speaking ironically and have nothing but good things to say about what you do. Life cereal do not change a thing.
User avatar
Murdoch
bitDisciple
Posts: 1394
Joined: Mon May 01, 2006 8:17 pm
4 + 3 =: 0
antispamboolean: No
Location: out of nowhere and POW BABY!

Post by Murdoch »

hey thanks man.

Did the pinstripe speedflame today. Will be cut out and used on the hood.

Image
evoraptor
bitNinja
Posts: 631
Joined: Mon Apr 25, 2005 6:59 pm
4 + 3 =: 0
antispamboolean: No
Location: SoCal
Contact:

Post by evoraptor »

Image
User avatar
Murdoch
bitDisciple
Posts: 1394
Joined: Mon May 01, 2006 8:17 pm
4 + 3 =: 0
antispamboolean: No
Location: out of nowhere and POW BABY!

Post by Murdoch »

I'm going to go with either these:
http://www.hpiracing.com/piw4.php?part=3772

or these if they're available:
http://www.hpiracing.com/piw4.php?part=3712
User avatar
Murdoch
bitDisciple
Posts: 1394
Joined: Mon May 01, 2006 8:17 pm
4 + 3 =: 0
antispamboolean: No
Location: out of nowhere and POW BABY!

Post by Murdoch »

So far so good. I wanted to go with flames on the hood originally but the mask proved to be a bitch in that area. So I decided to go with double pinstripes instead.

Image

The boys heard what was going on and decided to pay the shop a visit.
Image
User avatar
Murdoch
bitDisciple
Posts: 1394
Joined: Mon May 01, 2006 8:17 pm
4 + 3 =: 0
antispamboolean: No
Location: out of nowhere and POW BABY!

Post by Murdoch »

Final color is on and now it's back in for clearcoating. Keep in mind this is my first attempt at freehand pinstripe cutting.

Image
Image
Maxximum Attack
bitDisciple
Posts: 1798
Joined: Thu Jul 31, 2003 7:15 pm
4 + 3 =: 0
antispamboolean: No
Location: Barbados

Post by Maxximum Attack »

I'd go with evoraptor, the Work XSA's would look sweet on that. Plus the deep dis would set that supercar off nicely. 0mm offset is soooooo out :? it's all about 6mm+ now :-o

The car's coming along nicely tho
Image
User avatar
crazydave
bitPimp
Posts: 6874
Joined: Thu Apr 17, 2003 9:05 am
4 + 3 =: 0
antispamboolean: No
Location: Koolsville

Post by crazydave »

Maxximum Attack wrote:I'd go with evoraptor, the Work XSA's would look sweet on that. Plus the deep dis would set that supercar off nicely. 0mm offset is soooooo out :? it's all about 6mm+ now :-o

The car's coming along nicely tho
I don't know about offsets and what nots, but I think the black centers would really set that awesome shade of blue off.
...crazy man, crazy...dig it.
crazydave's Gallery
Ratfink says: "Man, it's the craziest"
User avatar
Murdoch
bitDisciple
Posts: 1394
Joined: Mon May 01, 2006 8:17 pm
4 + 3 =: 0
antispamboolean: No
Location: out of nowhere and POW BABY!

Post by Murdoch »

That's assuming I can get them at the LHS. right now, ordering parts is out. too close to the scheduled show date.
Maxximum Attack
bitDisciple
Posts: 1798
Joined: Thu Jul 31, 2003 7:15 pm
4 + 3 =: 0
antispamboolean: No
Location: Barbados

Post by Maxximum Attack »

crazydave wrote:
Maxximum Attack wrote:I'd go with evoraptor, the Work XSA's would look sweet on that. Plus the deep dis would set that supercar off nicely. 0mm offset is soooooo out :? it's all about 6mm+ now :-o

The car's coming along nicely tho
I don't know about offsets and what nots, but I think the black centers would really set that awesome shade of blue off.
you use different offset to fit the rims flush with the side of the car. 190mm bodies are designed to mainlly use 0mm offset rims. That is, when the rims go on the chassis they fill out the body.

Recently, HPI has stopped making 190mm bodies, since the trend toward deep-dish rims. Making 200mm bodies for electric cars means that the bodies are now 5mm wider at each wheel and encourages deep dish rims.

I have a narrow chassis, so I have to use 7mm offset to fill a 190mm body. :cool:

Hope that helped
Image
User avatar
Murdoch
bitDisciple
Posts: 1394
Joined: Mon May 01, 2006 8:17 pm
4 + 3 =: 0
antispamboolean: No
Location: out of nowhere and POW BABY!

Post by Murdoch »

Shell's done. a few things left to do such as wire up the other lights (little party piece I came up with) and some decals.. and i'll be set.

Image
Image
Image
Image


It turned out alright. Not as good as the Zonda but pretty close. Looking at the body and the way it sits on the chassis, I'll definitely go with an offset in the rears.


the white LED headlamps threw the camera's white balance off a bit.
User avatar
betty.k
bitPimp
Posts: 4089
Joined: Fri Dec 26, 2003 4:52 pm
4 + 3 =: 0
antispamboolean: No
Location: la la land
Contact:

Post by betty.k »

definately offset those rears, fill dem wheelwells. :-o
i used to be cool
Image
Maxximum Attack
bitDisciple
Posts: 1798
Joined: Thu Jul 31, 2003 7:15 pm
4 + 3 =: 0
antispamboolean: No
Location: Barbados

Post by Maxximum Attack »

...at least 6mm
3mm in the front
Image
Post Reply