ANUBIS: The construction of...

All discussions about 1:18 scale and up electric offroad RCs.
Post Reply
User avatar
redrustbucket
bitGangsta'
Posts: 363
Joined: Wed Mar 15, 2006 9:41 pm
Location: sunny acres, fl

Post by redrustbucket »

Damn, that's nice. My armchair fabricating has me wondering if the drive shafts will get sloppy with wear along the slot. You could help alleviate it with another set screw or 2 in the inner or go with square stock which wouldn't look as scale but eliminate some of the wear. I guess time will tell how thw aluminum holds up.

Nice work bro. :-o
The devil made me do it the first time, the second time I done it on my own...
tlca # 14622
Top
sg219
bitPimp
Posts: 4244
Joined: Thu Jan 22, 2004 1:00 pm
Location: Kennywood, PA
Contact:
Contact sg219

Post by sg219 »

redrustbucket wrote:Damn, that's nice. My armchair fabricating has me wondering if the drive shafts will get sloppy with wear along the slot. You could help alleviate it with another set screw or 2 in the inner or go with square stock which wouldn't look as scale but eliminate some of the wear. I guess time will tell how thw aluminum holds up.

Nice work bro. :-o
I was thinking the same thing about wear and tear. I think they will hold up pretty well. The thickness of the outer tube is pretty thick, about 1/8" or so.

Only time will tell.

I do know one thing.......I won't be popping driveshafts like those shitty plastic ones. :-o
Top
Post Reply

Return to “Electric Offroad Discussion”